topic Re: Destination Host Unreachable - 8.8.8.8 (intermittent) in General Topics

Destination Host Unreachable - 8.8.8.8 (intermittent)

adrian_ — Sat, 27 Feb 2021 04:25:41 GMT

Hello CheckMates,

We suddenly have issues on our CheckPoint Firewall 4800 going out to internet.

It is a WIFI to our Guest and I have check the Switch, APs, WLC and our Modem(Direct connection is working)

We are associated in our WLC and it was even to provide us an IP address from WLC.

The issue is that the WIFI logo is showing with ! using our mobile

Troubleshooting Done.

1.) Reboot AP
2.) Shut/Unshut ports on switch
3.) Adjust Power Level
4.) Turn off/on the SSID
5.) No Changes on VLANs/WLC on the switch
6.) Direct Connection in the ONT – Working

Here is the result when doing a ping test to 8.8.8.8, btw we have a spare same firewall but same issue

PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
From 10x.x.x icmp_seq=2 Destination Host Unreachable
From 10x.x.x icmp_seq=3 Destination Host Unreachable
From 10x.x.x icmp_seq=4 Destination Host Unreachable
From 10x.x.x icmp_seq=6 Destination Host Unreachable
From 10x.x.x icmp_seq=7 Destination Host Unreachable
From 10x.x.x icmp_seq=8 Destination Host Unreachable

Sometimes the firewall can ping 8.8.8.8

8.8.8.8: bytes=32 time=5ms TTL=116
8.8.8.8: bytes=32 time=4ms TTL=116
8.8.8.8: bytes=32 time=4ms TTL=116
8.8.8.8: bytes=32 time=4ms TTL=116

Re: Destination Host Unreachable - 8.8.8.8 (intermittent)

PhoneBoy — Sat, 27 Feb 2021 08:09:42 GMT

What host is generating the Destination Unreachable message?
That generally means it doesn’t have the necessary route.
How is the default route defined on the 4800?
What version/JHF is running on the 4800?

Re: Destination Host Unreachable - 8.8.8.8 (intermittent)

adrian_ — Sat, 27 Feb 2021 08:32:15 GMT

It is intermittent, it can ping destination and mostly it will result to host unreachable.

Interface eth2 10x.x.110 /30

set static-route default nexthop gateway address 10x.x.x.109 priority 1 on
set static-route default nexthop gateway logical eth2 priority 1 on

This config is being used since 2018 then few days ago we experience an issue on our guest wifi.

Our version is using Check Point R75.4

Re: Destination Host Unreachable - 8.8.8.8 (intermittent)

adrian_ — Sat, 27 Feb 2021 08:34:54 GMT

This one have a NAT config from the smart console.

I am still figuring out how to access it.

Basically,

The guest user segment is 192.168.10.0/24

All the wifi client will be natted to ip 10x.x.x.110 when accessing internet

Re: Destination Host Unreachable - 8.8.8.8 (intermittent)

PhoneBoy — Sat, 27 Feb 2021 17:08:33 GMT

R75.40 is very, very End of Support at this point (several years now) and recommend upgrading to a supported release.

Setting a default route to point to a given interface is not recommended and could cause issues with the arp table filling up.
You only need to configure it to point to the next hop IP.
Remove that specific route.

The NAT is probably configured in the object that represents the Guest WiFI network in SmartDashboard.

Re: Destination Host Unreachable - 8.8.8.8 (intermittent)

adrian_ — Sun, 28 Feb 2021 03:08:40 GMT

Hi,

I will remove the following config

set static-route default nexthop gateway logical eth2 priority 1 on

Then leave the remaining config

set static-route default nexthop gateway address 10x.x.x.109 priority 1 on

How do I clear the ARP cache using a cli config?

Thanks

Re: Destination Host Unreachable - 8.8.8.8 (intermittent)

PhoneBoy — Sun, 28 Feb 2021 07:10:45 GMT

First of all, when you remove the route, the arp cache being full should no longer be an issue, assuming there is an ARP entry for the default route.
Second, I don't believe there is a way to clear the arp cache, but it should clear on its own.

Re: Destination Host Unreachable - 8.8.8.8 (intermittent)

adrian_ — Sun, 28 Feb 2021 07:56:12 GMT

I will remove the config then hopefully it will fix the issue.

I am new using checkpoint, what is the command to remove set static-route default nexthop gateway logical eth2 priority 1 on?

Thanks

Re: Destination Host Unreachable - 8.8.8.8 (intermittent)

Vincent_Bacher — Sun, 28 Feb 2021 09:18:05 GMT

I would not do any troubleshooting here at all until I had carried out an update, as also recommended by Phoneboy.

Re: Destination Host Unreachable - 8.8.8.8 (intermittent)

adrian_ — Mon, 01 Mar 2021 12:39:05 GMT

Hi All,

Removing set static-route default nexthop gateway logical eth2 priority 1 on able to resolve the issue of destination host unreachable.

Thanks for all the help!