https://community.checkpoint.com/t5/General-Topics/Connection-per-second-test/m-p/105185#M20183 <P>In addition to more SNDs, you would probably need to enable multiqueue.<BR />I don’t know the precise mix used for the data sheet test.</P> <P>It would be far easier to upgrade to R80.40, enable dynamic workloads, and perform the test.<BR />The gateway will adjust the SND/FWK mix on the fly.</P> Fri, 11 Dec 2020 20:44:26 GMT PhoneBoy 2020-12-11T20:44:26Z https://community.checkpoint.com/t5/General-Topics/Connection-per-second-test/m-p/105088#M20168 <P>Perform performance tests using 15400 device，the Connection/ Second results were only half of those of the Detesheet,about 80-90K，how&nbsp;to allocate CPU to make the test result close to datesheet? At present, there are 2 SNDS, 14 Core FW, and the test version is R80.30</P> Fri, 11 Dec 2020 02:18:41 GMT https://community.checkpoint.com/t5/General-Topics/Connection-per-second-test/m-p/105088#M20168 yun_yuankang 2020-12-11T02:18:41Z https://community.checkpoint.com/t5/General-Topics/Connection-per-second-test/m-p/105185#M20183 <P>In addition to more SNDs, you would probably need to enable multiqueue.<BR />I don’t know the precise mix used for the data sheet test.</P> <P>It would be far easier to upgrade to R80.40, enable dynamic workloads, and perform the test.<BR />The gateway will adjust the SND/FWK mix on the fly.</P> Fri, 11 Dec 2020 20:44:26 GMT https://community.checkpoint.com/t5/General-Topics/Connection-per-second-test/m-p/105185#M20183 PhoneBoy 2020-12-11T20:44:26Z