topic Re: How to update JHF (VSX) in General Topics

How to update JHF (VSX)

chaymosphere — Thu, 15 Oct 2020 01:59:38 GMT

Hi guys, how do you update your JHF in VSX to the latest version? I have already experience with normal setup(Standalone/clusterFW) however, idk if its the same procedure? do you have a link or any recommendation guide?

Re: How to update JHF (VSX)

Tal_Paz-Fridman — Thu, 15 Oct 2020 10:21:32 GMT

Use the Jumbo Hotfix Accumulator for... page depending on your version.

For example if you are running R80.40 then use Jumbo Hotfix Accumulator for R80.40 (R80_40_jumbo_hf):

https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk165456

Re: How to update JHF (VSX)

G_W_Albrecht — Thu, 15 Oct 2020 13:52:23 GMT

With R80.40, you have Support for VSX upgrade with CPUSE in Gaia Portal. Lower versions would use CPUSE CLI.

Re: How to update JHF (VSX)

chaymosphere — Thu, 15 Oct 2020 23:38:59 GMT

btw, they are using lower version 😅 and it's r77.30 they are planning to update the CPUSE and JHF to 351. my question is where can I update the JHF in CLI too?

Re: How to update JHF (VSX)

chaymosphere — Thu, 15 Oct 2020 23:40:05 GMT

thanks for the link but they are using lower version hehe

Re: How to update JHF (VSX)

Kaspars_Zibarts — Fri, 16 Oct 2020 05:53:02 GMT

command set for cpuse in clish is "installer.."

installer download (tab) then select JHF

installer verify (tab) then select JFH

installer install (tab) then select JHF

Re: How to update JHF (VSX)

chaymosphere — Fri, 16 Oct 2020 09:16:30 GMT

May I also know if this is offline? and what directory will i put the jhf? or is this automatically downloadable via cli?

Re: How to update JHF (VSX)

shlomip — Fri, 16 Oct 2020 10:28:49 GMT

@chaymosphere ,

You can see more information about CPUSE, including it's CLI commands in sk92449

Re: How to update JHF (VSX)

Bob_Zimmerman — Fri, 16 Oct 2020 13:30:05 GMT

The cool thing about doing it offline via the CLI is the commands become deterministic. You never need to use tab completion.

Copy the file to the server you are updating. It can be put almost anywhere. For this example, I will use /home/admin.
Import the fix into CPUSE using 'clish -c "installer import local /home/admin/Check_Point_R77_30_JUMBO_HF_1_Bundle_T351_FULL.tgz"'
Install the fix using 'clish -c "installer install Check_Point_R77_30_JUMBO_HF_1_Bundle_T351_FULL.tgz"'

Done.