topic Re: Link-Aggregation via 802.1ad LACP - 2x10G SFP+ issue in General Topics

Link-Aggregation via 802.1ad LACP - 2x10G SFP+ issue

Jerry — Thu, 16 Apr 2020 11:00:55 GMT

hi chaps

quick one, what would you do if you permanently have following state on your LACP link whils you 2 10G links are up/up?

Aggregated interface: ae1

LACP state: Role Exp Def Dist Col Syn Aggr Timeout Activity
xe-0/1/1 Actor No Yes No No No Yes Fast Active
xe-0/1/1 Partner No Yes No No No Yes Fast Passive
xe-0/1/2 Actor No No Yes Yes Yes Yes Fast Active
xe-0/1/2 Partner No No Yes Yes Yes Yes Slow Active

LACP protocol: Receive State Transmit State Mux State
xe-0/1/1 Defaulted Fast periodic Detached
xe-0/1/2 Current Slow periodic Collecting distributing

--- that means that only 1 link works, another is "detached" - but why? here is the stats view:

Aggregated interface: ae1
LACP Statistics: LACP Rx LACP Tx Unknown Rx Illegal Rx
xe-0/1/1 0 310 0 0
xe-0/1/2 310 15 0 0

--- that also means that links are ASYNC with regards to the flow - why ? should I really change 802.3ad to use L3-4 rather than L2 ? That Bond1 has L2 Fast at the moment, should I try L3+4 Fast instead ?

any hinst highly appreciated.

Cheers

Re: Link-Aggregation via 802.1ad LACP - 2x10G SFP+ issue

Benedikt_Weissl — Thu, 16 Apr 2020 11:39:10 GMT

Hi,

you dont receive any LACP PDUs on xe-0/1/1, is xe-0/1/1 up? Check the cabling and GBIC values (show interfaces diagnostics optics).

Re: Link-Aggregation via 802.1ad LACP - 2x10G SFP+ issue

Jerry — Thu, 16 Apr 2020 13:16:10 GMT

ha, spot on 🙂 all sorted, I have realized that 2 fibre cables aren't the same, lenght and param's wise - made them 2 identical and now LACP works like a charm :))) cheers!

Re: Link-Aggregation via 802.1ad LACP - 2x10G SFP+ issue

Benedikt_Weissl — Fri, 17 Apr 2020 07:11:31 GMT

I'm glad it works now ! P.S. Kudos are always appreciated 😉

Re: Link-Aggregation via 802.1ad LACP - 2x10G SFP+ issue

Jerry — Fri, 17 Apr 2020 08:32:10 GMT

LOL 🙂