topic Re: HP DL380 Gen10 R80.20 kernel 3.10 or R80.30 kernel 3.10 Installation Issues in General Topics

HP DL380 Gen10 R80.20 kernel 3.10 or R80.30 kernel 3.10 Installation Issues

Kris_Leacharoen — Thu, 26 Dec 2019 09:43:08 GMT

Is there anyone can install R80.20 / R80.30 kernel 3.10 on HP DL380 Gen10 server ?

Hardware is HP DL380 Gen10 with raid controller HPE Smart Array P816i-a SR Gen10.

as state in HCL.

installation progress through disk format and reboot for first time
but after that failed to access harddisk and remain in boot loop.

BIOS configuration
- HT disable
- X2APIC disable
- enable legacy boot
- Raid controler present on boot controller order

Install from external dvd drive.

we also tested Linux legacy boot installation which success to install and boot into OS
but failed on Gaia kernel 3.10

Re: HP DL380 Gen10 R80.20 kernel 3.10 or R80.30 kernel 3.10 Installation Issues

HeikoAnkenbrand — Thu, 26 Dec 2019 20:54:13 GMT

Maybe it is a problem as described in this article with HP DL360/380 G9:

HP Server DL360 380 G9 reboot issue

Tip: Use an older BIOS.

Re: HP DL380 Gen10 R80.20 kernel 3.10 or R80.30 kernel 3.10 Installation Issues

HeikoAnkenbrand — Thu, 26 Dec 2019 21:00:38 GMT

Hi @Kris_Leacharoen

Read sk108200 - Required steps before installing Gaia OS on HP ProLiant Gen9 + Gen 10 servers

Re: HP DL380 Gen10 R80.20 kernel 3.10 or R80.30 kernel 3.10 Installation Issues

Magnus-Holmberg — Thu, 26 Dec 2019 21:20:58 GMT

We had multiple issues installing R80.30 3.10 from usb mem etc.

the one that worked every time was from ILO.

/Magnus

Re: HP DL380 Gen10 R80.20 kernel 3.10 or R80.30 kernel 3.10 Installation Issues

HeikoAnkenbrand — Thu, 26 Dec 2019 21:35:40 GMT

The HP ProLiant DL380 Gen10 does not detect all USB devices, including various USB flash drives (regardless of their content). This is not a software issue. If a bootable USB device is not recognized by this server, try a different USB device vendor.

Re: HP DL380 Gen10 R80.20 kernel 3.10 or R80.30 kernel 3.10 Installation Issues

HeikoAnkenbrand — Thu, 26 Dec 2019 21:44:07 GMT

Im use a "Zalman ZM-VE300 2.5” HDD/SSD Enclosure Virtual ODD USB 3.0/2.0" for years to install GAIA.:-)

I think ZM-350 should work too.

It is a USB hard disk that can simulate stored ISO's as a DVD ROM drive.

Re: HP DL380 Gen10 R80.20 kernel 3.10 or R80.30 kernel 3.10 Installation Issues

Regi_Suhm — Thu, 26 Dec 2019 21:48:17 GMT

It is very nice:-)