topic Re: Is there a way to pull a text from a gateway on the management station using established trust ( in General Topics

Is there a way to pull a text from a gateway on the management station using established trust (with

Jin_Zhou — Mon, 09 Dec 2019 19:03:35 GMT

I am trying to automate some process and need to get a text file from a gateway on the management station. Is there a way to do it using the established trust? Tried to use run-script to cat the file, but output is garbled text. Thanks.

Re: Is there a way to pull a text from a gateway on the management station using established trust (

Timothy_Hall — Mon, 09 Dec 2019 19:18:33 GMT

Assuming SIC is already established, yes.

GAIA - Easy execute CLI commands on all gateways s...

Re: Is there a way to pull a text from a gateway on the management station using established trust (

Jin_Zhou — Mon, 09 Dec 2019 19:39:07 GMT

Thanks Tim. That is a great script. I will look into it to see if it can solve my problem.

Re: Is there a way to pull a text from a gateway on the management station using established trust (

masher — Mon, 09 Dec 2019 20:05:24 GMT

Depending on the request, the response will be returned with base64 encoding. You would need to parse the response from the gateway and then decode it.

For example - Using mgmt_cli on the Manager and running ifconfig on the gateway and filtering for the task details:

# mgmt_cli -r true run-script script-name test2 script "ifconfig eth1" targets gw01 -f json | jq -r '.tasks[]|."task-details"[]|.responseMessage'| base64 -d

It provides the following data:

---------------------------------------------
Time: [15:02:13] 9/12/2019
---------------------------------------------
"gw01 - test2" succeeded (100%) 
eth1 Link encap:Ethernet HWaddr 00:1C:7F:84:6B:68 
inet addr:172.16.99.1 Bcast:172.16.99.255 Mask:255.255.255.0
inet6 addr: fe80::21c:7fff:fe84:6b68/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:108809061 errors:0 dropped:10061860 overruns:0 frame:0
TX packets:315274900 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000 
RX bytes:27556684726 (25.6 GiB) TX bytes:443734405363 (413.2 GiB)

Re: Is there a way to pull a text from a gateway on the management station using established trust (

Jin_Zhou — Mon, 09 Dec 2019 20:13:39 GMT

Thanks. That should work too. However, from Tim's solution I found this command "cprid_util". It should do exact what I need. You can run cprid_util --help for more information.