topic IPsec VPN between Junifer(SSG 6.3.0 r25) and CheckPoint(R80.10) in General Topics

IPsec VPN between Junifer(SSG 6.3.0 r25) and CheckPoint(R80.10)

TAEKBOM_Kim — Wed, 18 Jul 2018 14:44:06 GMT

Hi all,

I will configure site to site IPsec VPN between Junifer(SSG 6.3.0 r25) and CheckPoint(R80.10).
I wonder Is it possible?

No.1
=> Has anyone configured IPsec VPN between Junifer and CheckPoint(R80.10)?
:

No.2
=> Can I get some resources? How to configure IPsec VPN between Junifer and CheckPoint(R80.10).

Thank you!!

Re: IPsec VPN between Junifer(SSG 6.3.0 r25) and CheckPoint(R80.10)

Nüüül — Wed, 18 Jul 2018 14:56:30 GMT

Hi,

it depends a bit, in what you will need to configure. But in most cases this works.

here is a good start:

How to set up a Site-to-Site VPN with a 3rd-party remote gateway

Regards

Daniel

Re: IPsec VPN between Junifer(SSG 6.3.0 r25) and CheckPoint(R80.10)

Timothy_Hall — Wed, 18 Jul 2018 16:25:29 GMT

Juniper boxes are quite picky about what Proxy-IDs/subnets they will accept in an IKE Phase 2 proposal sent by a Check Point. You will almost certainly need to make the user.def modifications described in Scenario 1 of sk108600: VPN Site-to-Site with 3rd party. Fortinet and Sonicwall devices are similarly picky.

--
Second Edition of my "Max Power" Firewall Book
Now Available at http://www.maxpowerfirewalls.com