Policy Based routing, NAT issue

Wolfgang — Fri, 16 Aug 2019 06:09:42 GMT

Hello checkmates,

I had a problem with PBR (plicy based routing) and hide NAT.

We defined an automatic hide NAT on a network object with option hide behind gateway. Hide NAT works as expected,

Depending the routing configuration, IP-address from interface eth0 or eth1 is used as NAT address.

But if we use PBR for this network the IP-address of the interface regarding the default route is used as NAT address.

Does the option "hide behind gateway" uses the outgoing interface IP as NAT address or depends this NAT address of the configured static-routes and the interface this route is directed?

Is there something different with PBR and hide behind gateway NAT?

Thanks

Wolfgang

Re: Policy Based routing, NAT issue

Timothy_Hall — Fri, 16 Aug 2019 12:00:52 GMT

Please see this recent thread:

https://community.checkpoint.com/t5/Enterprise-Appliances-and-Gaia/PBR-and-Hide-NAT/m-p/59969

topic Policy Based routing, NAT issue in General Topics

Policy Based routing, NAT issue

Re: Policy Based routing, NAT issue