topic Peak bandwith on interfaces? in General Topics

Peak bandwith on interfaces?

kobilevi — Thu, 16 May 2019 05:31:22 GMT

Hello

i have 2 check point in cluster and i want to check peak bandwith history on the interfaces ? can someone help?

Tanks

Re: Peak bandwith on interfaces?

Benedikt_Weissl — Thu, 16 May 2019 11:54:17 GMT

If monitoring blade is activated you can create a custom report in smartview monitor (logs and monitor -> new tab -> "Tunnel & User Monitoring"). There should be a report named "Top Interfaces" that might already give you all the information you want. Alternatively the command cpview can be configured to save past states "cpview history on" and then "cpview -t". Use "+" and "-" to move from snapshot to snapshot. Check past peak values in "network.interfaces.traffic".

Re: Peak bandwith on interfaces?

kobilevi — Sun, 19 May 2019 11:07:25 GMT

hello i have 2 appliance , i have 2 columns "peak" and i need to know the peak traffic both in interfaces eth2 on same time both applaince ... ideas?

Re: Peak bandwith on interfaces?

PhoneBoy — Mon, 20 May 2019 02:21:35 GMT

If you want to do it in cpview, history mode needs to be enabled.
See: https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk101878

Re: Peak bandwith on interfaces?

kobilevi — Mon, 20 May 2019 07:15:26 GMT

ok tanks alot!!!

but if i have 2 appliance and i want both statistic in right time it is possible ???

example :

appliance 1 --> eth 2 output 4 MPS

appliance 2 ---> eth2 output 4 MPS

i want history graph that show 8 MPS together

tanks