topic Re: Re-enable blade in Endpoint

Re-enable blade

johnrich — Wed, 06 Sep 2023 12:06:37 GMT

Hello, I have decrypted the hard disk of one laptop using "UseRec.exe" Full Disk Encryption Volume Recovery Utility.

Now, after the decryption, Windows boot correctly but I have the FDE blade disabled.

How I can re-enable this blade adn try to re-encrypt again the hard disk?

I attach a screenshot

Re: Re-enable blade

the_rock — Wed, 06 Sep 2023 19:16:21 GMT

I would check with TAC, just to be sure. Its bit odd, as it shows installed, but inactive.

Andy

Re: Re-enable blade

PhoneBoy — Thu, 07 Sep 2023 00:13:55 GMT

My guess is to "disable" the blade on the relevant endpoint and re-enable it.
I believe this is done by putting the device in a group where this blade is disabled.