https://community.checkpoint.com/t5/Endpoint/Harmony-EP-Media-Encryption-and-Port-Protection-Discovery/m-p/189644#M7454 <P>I believe it is only on insertion that Port Protection is activated.<BR />I presume a reboot of the PC would also potentially activate this since that would force all USB devices to be re-inserted.</P> Wed, 16 Aug 2023 18:10:21 GMT PhoneBoy 2023-08-16T18:10:21Z https://community.checkpoint.com/t5/Endpoint/Harmony-EP-Media-Encryption-and-Port-Protection-Discovery/m-p/189607#M7453 <P>Looking to enable the Media Enc + Port protection blades on Harmony Endpoint clients (first time enabling).&nbsp; I'd like to initially enable a "discovery" policy that would just go out and find what all peripheral and storages devices are plugged in on their endpoints without any enforcement.&nbsp; I tested this type of policy in my lab and it didn't discover any of the devices on my test PC until I physically unplugged and plugged a peripheral back in.&nbsp; Is this the expected behavior?&nbsp; I was really hoping that when the MEPP blade and policies were enabled that it would do some kind of initial scan and tell me what all is plugged in already.</P> Wed, 16 Aug 2023 13:14:38 GMT https://community.checkpoint.com/t5/Endpoint/Harmony-EP-Media-Encryption-and-Port-Protection-Discovery/m-p/189607#M7453 Dr_Steve_Brule 2023-08-16T13:14:38Z https://community.checkpoint.com/t5/Endpoint/Harmony-EP-Media-Encryption-and-Port-Protection-Discovery/m-p/189644#M7454 <P>I believe it is only on insertion that Port Protection is activated.<BR />I presume a reboot of the PC would also potentially activate this since that would force all USB devices to be re-inserted.</P> Wed, 16 Aug 2023 18:10:21 GMT https://community.checkpoint.com/t5/Endpoint/Harmony-EP-Media-Encryption-and-Port-Protection-Discovery/m-p/189644#M7454 PhoneBoy 2023-08-16T18:10:21Z