topic Reset PRAM on Mac with FDE Installed, Can't Boot in Endpoint https://community.checkpoint.com/t5/Endpoint/Reset-PRAM-on-Mac-with-FDE-Installed-Can-t-Boot/m-p/5552#M72 <HTML><HEAD></HEAD><BODY><P>Something one occasionally has to do on a Mac is reset the PRAM (hold down Cmd-Alt-P-R on initial startup).</P><P>However, doing this on a system with Full Disk Encryption installed may cause the Mac to appear not to boot (or to boot into the recovery image).</P><P></P><P>If this happens to you, hold down the Alt key on power up.</P><P>This will bring up a list of volumes to boot from.</P><P>For me, I had to choose the second volume listed (first one just booted into the recovery image).</P></BODY></HTML> Mon, 21 Aug 2017 21:33:15 GMT PhoneBoy 2017-08-21T21:33:15Z Reset PRAM on Mac with FDE Installed, Can't Boot https://community.checkpoint.com/t5/Endpoint/Reset-PRAM-on-Mac-with-FDE-Installed-Can-t-Boot/m-p/5552#M72 <HTML><HEAD></HEAD><BODY><P>Something one occasionally has to do on a Mac is reset the PRAM (hold down Cmd-Alt-P-R on initial startup).</P><P>However, doing this on a system with Full Disk Encryption installed may cause the Mac to appear not to boot (or to boot into the recovery image).</P><P></P><P>If this happens to you, hold down the Alt key on power up.</P><P>This will bring up a list of volumes to boot from.</P><P>For me, I had to choose the second volume listed (first one just booted into the recovery image).</P></BODY></HTML> Mon, 21 Aug 2017 21:33:15 GMT https://community.checkpoint.com/t5/Endpoint/Reset-PRAM-on-Mac-with-FDE-Installed-Can-t-Boot/m-p/5552#M72 PhoneBoy 2017-08-21T21:33:15Z