topic Re: Harmony Endpoint E86.30 on Win2012R2 in Endpoint

Harmony Endpoint E86.30 on Win2012R2

John_Richards — Wed, 18 May 2022 20:42:27 GMT

We are trying to install Harmony Endpoint Client E86.30.0151 on Win2012R2 and when we open the client on the server we see Endpoint Security Agent not running. Policies will not be updated. Contact your administrator. When we try to run the Check Point Endpoint Agent is starts then stops. We get a MS error 1237 which does not help. Any thoughts? It does work on some other systems that are 2012R2.

Re: Harmony Endpoint E86.30 on Win2012R2

Chris_Atkinson — Thu, 19 May 2022 11:17:26 GMT

Does the server have any special roles e.g. Failover cluster or other?

Re: Harmony Endpoint E86.30 on Win2012R2

John_Richards — Thu, 19 May 2022 14:49:00 GMT

No special roles

Re: Harmony Endpoint E86.30 on Win2012R2

John_Richards — Thu, 19 May 2022 18:58:12 GMT

Able to determined that the push from the harmony console to the servers is the problem as manual install on the server works. Push to Workstations not a problem, just servers. It appears the client installs but will not connect when doing a push.

Re: Harmony Endpoint E86.30 on Win2012R2

Michi — Mon, 23 May 2022 09:05:59 GMT

We had the same problem - it resolved by itself.