topic Re: Moving from Harmony to on-prem in Endpoint

Moving from Harmony to on-prem

CiaranR — Mon, 23 Aug 2021 21:31:46 GMT

Hello Folks,

We're in the process of setting up our new endpoint system. Initially it was thought we'd connect everything to the Harmony cloud.

After some initial testing, a reconfiguration was done as we do not want our internal devices going out to the internet, so we've set up an on-prem policy manager for internal devices to connect to, leaving laptops alone to connect to cloud.

One quirk that has come up: servers we initially tested with are checked-in to Harmony cloud. Is it possible to migrate these to point at our on-prem manager instead of the cloud?

Hope you can help,

CiaranR

Re: Moving from Harmony to on-prem

mcatanzaro — Tue, 24 Aug 2021 03:30:32 GMT

I don’t work with endpoint but do have experience with it, so I’ll take a stab since no one else has answered.

A tool known as the reconnect utility exists and sounds applicable to your situation.

Check Point recommends opening a support case before attempting a reconnect.

Re: Moving from Harmony to on-prem

PhoneBoy — Tue, 24 Aug 2021 03:46:47 GMT

The reconnect tool and the procedure to use it must be obtained from the TAC.

Re: Moving from Harmony to on-prem

CiaranR — Tue, 24 Aug 2021 08:29:14 GMT

Thanks for the response mcatanzaro, great to know. Our tech helping up set up is out but had mentioned this was possible before going. I'll take it to TAC today.