topic Re: Remote Endpoint Security VPN takes 1.5 minutes after connection to pass traffic after SCV enable in Endpoint

Remote Endpoint Security VPN takes 1.5 minutes after connection to pass traffic after SCV enabled

dmurray_HTE — Thu, 27 Aug 2020 13:13:57 GMT

After configuring Device Check of Reg key using $FWDIR\conf\local.scv,

When I connect, after being authenticated, on the client I can see it is compliant, and the connection is successful.

On the client if I ping to a resource behind the firewall, it takes approx 1.5 minutes before ping responses are received.

When I look at the logs, only after FW1_scv_keep_alive is logged does the client start encrypting traffic from/to the remote client. (See image below)

Any thoughts to how this time can be reduced/eliminated would be greatly appreciated.

Client is EndPoint Security E81.10 Build 986100611

FW Gateway is type 2200 Appliance running R80.20

Cheers

Re: Remote Endpoint Security VPN takes 1.5 minutes after connection to pass traffic after SCV enable

dmitry_shesterk — Wed, 20 Jan 2021 06:21:25 GMT

Hello, I have a similar problem, how did you solve it?

Re: Remote Endpoint Security VPN takes 1.5 minutes after connection to pass traffic after SCV enable

dmitry_shesterk — Wed, 20 Jan 2021 06:49:16 GMT

Hello, I have a similar problem, how did you solve it?