Endpoint VPN Office Mode smb shares

Marcus_Halmsjo — Tue, 12 May 2020 06:33:53 GMT

Hi,

Is it possible to access smb shares from the local network that an endpoint VPN client in office mode connects to?

Scenario:

client A is connected via VPN office mode and has IP 192.168.255.80, VPN is connected with secure domain logon so the client has no problem accesing shares from the local domain.
client B is on the local network and has IP 192.168.100.50

client B shares a folder that client A can access.

client A shares a folder client B cannot access.

client B can ping client A

No known rules in the gateway blocks traffic from 192.168.100.0/24 to 192.168.255.0/24 everything is logged and can't see any accepts, no drops or blocks related to smb

In testing the firewall blade on client A has been set to accept all incoming with logs and it shows no activity when trying to access smb, the icmp is logged though.

Am i missing something here or is it just by design?

The reason this is needed is so we can push software to everyone that suddenly works remotely.

Re: Endpoint VPN Office Mode smb shares

Chris_Atkinson — Wed, 13 May 2020 05:19:55 GMT

Can you tell us a little more about your configuration, are "hub mode" and "back connections" options enabled?

Re: Endpoint VPN Office Mode smb shares

Marcus_Halmsjo — Wed, 13 May 2020 06:43:00 GMT

back connections was not activated, hub mode is.
Though i managed to find that connections on port 445 gets to the client and is accepted in the endpoint firewall so it should work.

Tried with back connections on and no change

topic Endpoint VPN Office Mode smb shares in Endpoint

Endpoint VPN Office Mode smb shares

Re: Endpoint VPN Office Mode smb shares

Re: Endpoint VPN Office Mode smb shares