topic Re: No IP and server name after client install in Endpoint

No IP and server name after client install

Balazs_Agics — Fri, 26 May 2017 14:25:25 GMT

Hi All,

Maybe I do something in the wrong way, but after installing client with EPS.msi there is no connection to server, works in offline mode. If I just install Initial Client then Server Name and Server IP fields are empty, it only show a green connected in the pop-up window, and that's all.

Client version: E80.65 and E80.70

Client: Windows 7

Server version: R80.10

I'm running on temporary licenses and this worked for me earlier with no issues. I've upgraded from R80 to R80.10 a week ago.

Update: If I install the original Initial Client (not the downloaded one from my server) it asks the address of the server, but if I enter it, it says Failed to connect to server.

Thanks in advance, I've no more ideas.

Kind Regards,

Balázs

Re: No IP and server name after client install

Sagar_Manandhar — Tue, 18 Jul 2017 04:30:32 GMT

Hi,

Can you post the screenshot of the error.??

Thank you

Re: No IP and server name after client install

Premysl_Vresky — Wed, 07 Feb 2018 11:05:28 GMT

And the required ports and protocols are allowed?

Re: No IP and server name after client install

G_W_Albrecht — Wed, 07 Feb 2018 16:23:47 GMT

I assume that the used EPS.msi was generated using the EPSS and should contain the server IP. Did you check the client log ? If the Win FW is the culprit, you should see that in:

C:\Program Files (x86)\CheckPoint\Endpoint Security\Endpoint Common\Logs\cpda.log

Re: No IP and server name after client install

Gaurav_Pandya — Tue, 09 Apr 2019 18:10:02 GMT

Hi,

We had a same issue on Endpoint client. When i checked cpda.log, got below messages. Any idea why it happened.

Re: No IP and server name after client install

Maksym_Sofer — Sun, 21 Apr 2019 12:19:37 GMT

@Gaurav_Pandya

Most likely incorrect configuration.

Please check the following SK`s:

https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk109240&partition=Advanced&product=Endpoint

https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk106566&partition=Advanced&product=Endpoint

Re: No IP and server name after client install

Maksym_Sofer — Sun, 21 Apr 2019 12:23:02 GMT

@Balazs_Agics

I would like to suggest you opening SR with cpda.log file.

It can be found in the following location:

c:\Program Files (x86)\CheckPoint\Endpoint Security\Endpoint Common\Logs\