topic Re: Installed Take in GAIA API in API / CLI Discussion

Installed Take in GAIA API

Alex- — Thu, 30 Jul 2026 11:30:00 GMT

I'm seeing a discrepancy in the output of the installed Take from the cluster member themselves, when using the 'show-cluster-members' API endpoint. R82.10, GAIA API 1.9.

Gateway:

[Expert@Gateway-s01-01:0]# cpinfo -y FW1 This is Check Point CPinfo Build 914000231 for GAIA [FW1] HOTFIX_GOT_TPCONF_AUTOUPDATE HOTFIX_INEXT_NANO_EGG_AUTOUPDATE HOTFIX_R82_10_JUMBO_HF_MAIN Take: 36 HOTFIX_R82_10_MAAS_TUNNEL_AUTOUPDATE FW1 build number: This is Check Point's software version R82.10 - Build 013 kernel: R82.10 - Build 012 [Expert@Gateway-s01-01:0]#

API call:

{'hostname': 'Gateway-s01-01', 'installed-jumbo-take': 24, 'member-id': 1, 'member-status': 'Active', 'model': 'CheckPoint 3970', 'serial-number': '<removed>', 'site-id': 1, 'site-status': 'Active', 'version': 'R82.10'}

Confirmed when I tail the gaia_api_server.log:

30/07/26 13:24:14: MainThread: infra.annotations: INFO: { "response": 200, "body": { "sites": { "1": { "name": "Site 1", "site_id": 1, "status": "Active", "grade": 6, "members": [ { "hostname": "Gateway-s01-01", "serial_number": "<removed>", "model": "CheckPoint 3970", "version": "R82.10", "site_id": 1, "member_id": 1, "status": "Active", "pnotes": "IAC", "is_member_smo": true, "site_status": "Active", "installed_jumbo_take": 24, "hotfixes": [ "Hotfix Cpsdc Autoupdate", "Hotfix Got Tpconf Autoupdate", "Hotfix Inext Nano Egg Autoupdate", "Hotfix R82 10 Jumbo Hf Main", "Hotfix R82 10 Maas Tunnel Autoupdate", "Hotfix Infra Config Autoupdate", "Hotfix Otlp Ga", "Hotfix Quid Autoupdate", "Hotfix Hcp Autoupdate" ],

Take 36 was installed on top of Take 24, but the API still reports Take 24 unlike the gateways themselves.

Re: Installed Take in GAIA API

PhoneBoy — Thu, 30 Jul 2026 13:46:11 GMT

Sounds like a possible bug...will look into this.

Re: Installed Take in GAIA API

Bob_Zimmerman — Thu, 30 Jul 2026 17:00:42 GMT

Happens with R82 jumbo 118, too:

[Expert@DallasticXL-s01-01:0]# g_all cpinfo -y fw1 2>&1 | grep -P "(^[\d_:]+|_JUMBO_HF_MAIN)" 1_01: HOTFIX_R82_JUMBO_HF_MAIN Take: 118 1_02: HOTFIX_R82_JUMBO_HF_MAIN Take: 118 [Expert@DallasticXL-s01-01:0]# mgmt_cli -f json --context gaia_api -u admin show-cluster-members Password: { "members": [ { "hostname": "DallasticXL-s01-01", "installed-jumbo-take": 107, "member-id": 1, "member-status": "Active", "model": "Open Server", "serial-number": "##########", "site-id": 1, "site-status": "Active", "version": "R82" }, { "hostname": "DallasticXL-s01-02", "installed-jumbo-take": 107, "member-id": 2, "member-status": "Active", "model": "Check Point 3600", "serial-number": "##########", "site-id": 1, "site-status": "Active", "version": "R82" } ] }

118 and 36 also break logging to a management running a jumbo lower than 118 or 36.

Re: Installed Take in GAIA API

Alex- — Thu, 30 Jul 2026 18:11:46 GMT

I haven't tried Take 118 on a gateway because it breaks stuff, but with R82.10, the verifier gives a warning about the logging issue when checking Take 36.