topic Re: How to release lock from objects in R80.20 in API / CLI Discussion

How to release lock from objects in R80.20

Srihari_E — Wed, 28 Aug 2024 06:58:50 GMT

Please help us to resolve this issue.

Re: How to release lock from objects in R80.20

AkosBakos — Wed, 28 Aug 2024 06:37:01 GMT

Hi @Srihari_E

What is the exact issue? R80.20 is not supported anymore. Maybe you want to type R81.20?

Did you add object with mgmt_cli, and can't publish them?

In this case use mgmt_cli publish: https://sc1.checkpoint.com/documents/latest/APIs/#cli/publish~v1.9.1%20

Akos

Re: How to release lock from objects in R80.20

Srihari_E — Wed, 28 Aug 2024 07:13:20 GMT

my smart console application is opening in read only mode. One network object was locked.

Please check the shared screenshot.

Re: How to release lock from objects in R80.20

PhoneBoy — Wed, 28 Aug 2024 14:26:14 GMT

Objects are typically locked because another session edited them and hasn't published changes.
Review the sessions listed here:

If you find a session with locks/changes, right click on it and you should be able to publish or discard the session, which will release the lock.
(Note this is from R81.20, but similar options should show in R80.20)

Otherwise, you're going to have to edit the database manually to release the lock.
TAC should be able to assist with this, even though R80.20 is End of Support.

Re: How to release lock from objects in R80.20

Srihari_E — Wed, 28 Aug 2024 14:39:36 GMT

On 27-8-2024 I added objects in smart console cli and did not published correctly. After 15 minutes the smart console was logging in read only mode.

Re: How to release lock from objects in R80.20

the_rock — Wed, 28 Aug 2024 14:53:41 GMT

Just do what Phoneboy advised, its your best bet.

Andy