Checkpoint Simple Cluster installation via ansible is not working (R81.20)

Kirankatariya — Sun, 12 May 2024 17:24:14 GMT

I am unable to create Simple cluster object through Ansible despite ansible-playbook in checkmode dont have any error.

under api.elg log file i am getting below errors

2024-05-12 22:45:24,294 ERROR com.checkpoint.management.web_api_is.exceptions.WebApiGeneralException.log:50 [qtp1702513516-97] - Error message: [Requested object [GW1-2] not found]
"message" : "Requested object [GW1-2] not found"

My API Version is 1.9.1 & R81.20 Gaia version

===============================================================================================

mypc:/etc/ansible/checkpoint$ ansible-playbook addcluster.yml

PLAY [Add Checkpoint Gateway] ******************************************************************************************

TASK [Gathering Facts] *************************************************************************************************
ok: [10.1.1.250]

TASK [Add Cluster_XL Gateway] ******************************************************************************************
ok: [10.1.1.250]

PLAY RECAP *************************************************************************************************************
10.1.1.250 : ok=2 changed=0 unreachable=0 failed=0 skipped=0 rescued=0 ignored=0

=================================================================

My scripts

---

- name: "Add Checkpoint Gateway"

hosts: mgmt

connection: httpapi

tasks:

- name: "Add Cluster_XL Gateway"

check_point.mgmt.cp_mgmt_simple_cluster:

name: GW1-2

state: absent

cluster_mode: cluster-xl-ha

cluster_version: R81.20

color: "pink"

ip_address: 10.1.1.83

members:

- name: GW-1

one_time_password: "Admin@123"

ip_address: 10.1.1.81

interfaces:

- name: eth0

ip_address: 10.1.1.81

network_mask: 255.255.255.0

- name: eth1

ip_address: 10.2.1.81

network_mask: 255.255.255.0

- name: eth2

ip_address: 10.3.1.81

network_mask: 255.255.255.0

- name: eth3

ip_address: 10.4.1.81

network_mask: 255.255.255.0

- name: GW-2

one_time_password: "Admin@123"

ip_address: 10.1.1.82

interfaces:

- name: eth0

ip_address: 10.1.1.82

network_mask: 255.255.255.0

- name: eth1

ip_address: 10.2.1.82

network_mask: 255.255.255.0

- name: eth2

ip_address: 10.3.1.82

network_mask: 255.255.255.0

- name: eth3

ip_address: 10.4.1.82

network_mask: 255.255.255.0

interfaces:

- name: eth0

interface_type: "cluster"

ip_address: 10.1.1.83

network_mask: 255.255.255.0

anti_spoofing: true

topology: internal

topology_settings:

ip_address_behind_this_interface: "network defined by the interface ip and net mask"

- name: eth1

interface_type: "cluster"

ip_address: 10.2.1.83

network_mask: 255.255.255.0

anti_spoofing: true

topology: internal

topology_settings:

ip_address_behind_this_interface: "network defined by the interface ip and net mask"

- name: eth2

interface_type: cluster

ip_address: 10.3.1.83

network_mask: 255.255.255.0

topology: "external"

- name: eth3

interface_type: sync

ip_address: 10.4.1.83

network_mask: 255.255.255.0

anti_spoofing: true

topology: "internal"

topology_settings:

ip_address_behind_this_interface: "network defined by the interface ip and net mask"

auto_publish_session: true

Re: Checkpoint Simple Cluster installation via ansible is not working (R81.20)

PhoneBoy — Mon, 13 May 2024 15:42:14 GMT

@Eden_Brillant is the playbook missing anything?

Re: Checkpoint Simple Cluster installation via ansible is not working (R81.20)

Hugo_vd_Kooij — Tue, 14 May 2024 08:42:48 GMT

Looks like you are out to destroy an object:

name: GW1-2

state: absent

In general if you set somthing as absent in Ansible you want it removed.

topic Checkpoint Simple Cluster installation via ansible is not working (R81.20) in API / CLI Discussion

Checkpoint Simple Cluster installation via ansible is not working (R81.20)

Re: Checkpoint Simple Cluster installation via ansible is not working (R81.20)

Re: Checkpoint Simple Cluster installation via ansible is not working (R81.20)