topic Tryng to set a lot of domain on MTA'S GW settings - using API or dbedit in API / CLI Discussion

Tryng to set a lot of domain on MTA'S GW settings - using API or dbedit

Supporto_Checkp — Mon, 08 Feb 2021 09:59:58 GMT

I am trying to configure more than 150 domains on 8 GW for the MTA part; I'm looking for a way for a massive configuration:
I have tried with the API but there are no specific commands; you have to use the "generic-objects" but I have seen that from several problems (no sync between Smart Console and Dbedit)

At this point I have tried using dbedit but I cannot find the correct commands; I tried with:

addelement network_objects my_GW mta_domain_rules value

Do you have any ideas?

Thanks so much

Re: Tryng to set a lot of domain on MTA'S GW settings - using API or dbedit

PhoneBoy — Mon, 08 Feb 2021 19:32:50 GMT

Not the first request we’ve had for this.
Paging @Omer_Kleinstern

Re: Tryng to set a lot of domain on MTA'S GW settings - using API or dbedit

Supporto_Checkp — Tue, 09 Feb 2021 07:45:20 GMT

Hi @PhoneBoy i resolved my issue using dbedit's command - it was not easy to discover the commands but I did! 🙂

Re: Tryng to set a lot of domain on MTA'S GW settings - using API or dbedit

_Val_ — Tue, 09 Feb 2021 08:15:50 GMT

@Supporto_Checkp It would help community if you explain what command you are referring to.

Re: Tryng to set a lot of domain on MTA'S GW settings - using API or dbedit

Supporto_Checkp — Tue, 09 Feb 2021 08:24:36 GMT

@_Val_ below an example to create an MTA rule using dbedit commands:

addelement network_objects My_GW mta_settings:domains_rulebase:domain_rules mta_domain_rule ---> will create an empty MTA's rule

modify network_objects My_GW mta_settings:domains_rulebase:domain_rules:0:domain my_domain ---> wil add domain "my_domain" to MTA's rule number "0"

modify network_objects My_GW mta_settings:domains_rulebase:domain_rules:0:next_hop network_objects:my_next_hop ---> will add next_hop "my_next_hop" to MTA's rule number "0"

Hope it will be helpful 🙂

Re: Tryng to set a lot of domain on MTA'S GW settings - using API or dbedit

PhoneBoy — Wed, 10 Feb 2021 02:21:30 GMT

dbedit was never known for being easy to work with.
Good work 🙂