How to verify that SandBlast API is configured properly?

Matan_Mishan — Thu, 13 Jul 2017 08:30:11 GMT

If you are working with SandBlast API and would like to use Threat Extraction abilities, you can easily do the following procedure beforehand and make sure all is configured properly:

In order to make sure everything works, please follow these steps for R80.10 Security Gateways:

1. Edit the /opt/CPUserCheckPortal/phpincs/conf/TPAPI.ini file in Vi editor: change the value of scrub_service_portal_enabled to "TRUE".

2. Connect to: https://<gateway IP address>/UserCheck/ScrubService and verify an option to upload a file is given.

3. Send a file for extraction, verify the result is as expected.

4. Disable the feature by edit the /opt/CPUserCheckPortal/phpincs/conf/TPAPI.ini file in Vi editor: change the value of scrub_service_portal_enabled to "FALSE".

5. Connect to: https://<gateway IP address>/UserCheck/ScrubService and verify received "Page not Found Error"

Important: Do not forget to disable ScrubService feature by following steps 4-5

topic How to verify that SandBlast API is configured properly? in API / CLI Discussion

How to verify that SandBlast API is configured properly?