topic Re: Looking for ISOmorphic Additional OS Configuration Script format in API / CLI Discussion

Looking for ISOmorphic Additional OS Configuration Script format

Dorle_Teev — Thu, 16 May 2019 04:57:30 GMT

Hello Checkmates,

As the subject indicates, I would like to rapidly deploy using the scripts which can be included in the additional OS configuration and am unsure regarding the format of the script.

Does it follow standard clish commands and I can do as follows

set domainname domain.local

set dns primary 1.1.1.1

set interface Mgmt ipv4-address 2.2.2.2 mask-length 24

... etc

Re: Looking for ISOmorphic Additional OS Configuration Script format

PhoneBoy — Fri, 17 May 2019 23:38:41 GMT

Pretty sure it's clish commands.
If not, then it's expert commands 😬

Re: Looking for ISOmorphic Additional OS Configuration Script format

DrTee — Wed, 22 May 2019 05:11:23 GMT

You are correct! Clish commands are executed via the script in the tool, I believe post the initial install and reboot. You can execute all clish commands with the exceptions being those which require a reboot.

Re: Looking for ISOmorphic Additional OS Configuration Script format

Wolfgang — Wed, 22 May 2019 11:15:36 GMT

Dorle,

there is a limitation with the script. If there any command executed which needs an interaction like pressing "Y" or "N" or are there any failure messages running these script commands.... The script will failing and only the default install is running.

You can read this in my small document attached.

Wolfgang