topic Re: Web API one time script failed on standby cluster member in API / CLI Discussion

Web API one time script failed on standby cluster member

AntonMakarychev — Tue, 07 May 2019 12:51:28 GMT

Hello everyone,

I am writing a script for manual ISP switching and status checking.

No I have a problem with one time script execution on standby member of cluster.

I push cpstat fw command on all cluster members, and active works fine.

But when I push command on the standby node I receive an error:

Connection failed for X.X.X.X
Make sure that the machine is up and running, and that SIC has been established

X.X.X.X - ip of the standby node

I can see standby node in Smart Console and it works fine.

PhoneBoy — Tue, 07 May 2019 23:31:19 GMT

Which version of Security Gateway is this?
Note there seems to be an issue in general with some R80.10/R80.20 patch levels with reaching the secondary cluster member.
See: https://community.checkpoint.com/t5/General-Topics/R80-20-Issue-Monitoring-standby-cluster-members-via-VPN/m-p/48278

AntonMakarychev — Wed, 08 May 2019 07:00:12 GMT

On mgmt and cluster:

Product version Check Point Gaia R80.10

OS build 421

OS kernel version 2.6.18-92cpx86_64

OS edition 64-bit

Latest take 189 installed

AntonMakarychev — Tue, 14 May 2019 11:49:04 GMT

Rebooting standby node helped. Now everything works fine.