topic Re: Not able to connect Smart Management server in Splat R77.30 in Firewall and Security Management

Not able to connect Smart Management server in Splat R77.30

Myo_Min_Zaw — Fri, 19 Oct 2018 07:03:28 GMT

Hi Expert,

I am not able to connect to Smart Management server in Splat R77.30 version after restore the backup file. the error message is as per below:

cpwd_admin list

telnet 18190 and 18191 is working fine.

There is anything, I can check anymore. please kindly advice it.

Thanks.

Re: Not able to connect Smart Management server in Splat R77.30

Leo_Lin — Fri, 19 Oct 2018 07:14:53 GMT

Hi , do you make sure your ip is in the ip access list?

Re: Not able to connect Smart Management server in Splat R77.30

AlekseiShelepov — Fri, 19 Oct 2018 07:23:49 GMT

Connectivity between SmartDashboard and Security Management Server R77.30 and below fails on fresh installation

Can't establish CPMI connection to Standalone Appliance - Clean Install

Re: Not able to connect Smart Management server in Splat R77.30

_Val_ — Fri, 19 Oct 2018 11:57:00 GMT

what about GUI clients definitions?

Re: Not able to connect Smart Management server in Splat R77.30

Myo_Min_Zaw — Fri, 19 Oct 2018 12:28:15 GMT

Yes.

Re: Not able to connect Smart Management server in Splat R77.30

Myo_Min_Zaw — Fri, 19 Oct 2018 12:30:17 GMT

Fresh install and restore the backup file from other smart-1 device and install at new installation on this device and not able to connect for smart-dashboard. Webui access and ssh is no issue at all.

Re: Not able to connect Smart Management server in Splat R77.30

AlekseiShelepov — Fri, 19 Oct 2018 12:46:35 GMT

Have you read articles that I shared?

Install Jumbo Hotfix Accumulator take 143 or above.

CheckGUI Clients in cpconfig menu.

Re: Not able to connect Smart Management server in Splat R77.30

Myo_Min_Zaw — Fri, 19 Oct 2018 12:55:53 GMT

Dear Aleksei,

Yes, I also facing the same error as per below screen shot. But, for my version is not Gaia OS.. It is Splat R77.30 versio. That will be supported as well?

Re: Not able to connect Smart Management server in Splat R77.30

JozkoMrkvicka — Fri, 19 Oct 2018 17:56:56 GMT

What about expired license ?

Re: Not able to connect Smart Management server in Splat R77.30

Myo_Min_Zaw — Sun, 21 Oct 2018 09:01:00 GMT

I think that trial license is still valid!! pls kindly advice how can i narrow down and isolate for this issue related to license issue.

Thanks.

Re: Not able to connect Smart Management server in Splat R77.30

JozkoMrkvicka — Sun, 21 Oct 2018 09:04:02 GMT

Go to the CLI a enter following command from expert mode:

cplic print

Re: Not able to connect Smart Management server in Splat R77.30

Myo_Min_Zaw — Mon, 22 Oct 2018 05:13:00 GMT

Hi Jozko,

Below is my license print file

Look like that license is valid.

Re: Not able to connect Smart Management server in Splat R77.30

AlekseiShelepov — Mon, 22 Oct 2018 07:18:10 GMT

Jumbo Hotfixes are only for Gaia OS.

Have you checked GUI Clients in cpconfig menu?

sk122612 says :

The issue is relevant to the below scenarios:
Upon clean install of Security Management / Standalone / Multi-Domain Server R77.30 or below after January 24th 2018.
Upon adding CMA on Multi-Domain Server below 77.30 Jumbo Hotfix take 143 (Inlcuding previous versions) .
ICA certificate generation fails due to code issue (that is now fixed), causing connectivity to fail.

There were several threads here about the same thing. For it you need to install a hotfix. For Gaia R77.30 it is included in Jumbo Hotfix. For other version it could be provided by TAC. For R77.30 Gaia it is even included into updated base images: Check Point R77.30

Why are you even using SPLAT R77.30? It would be much better to install Gaia R77.30.

Re: Not able to connect Smart Management server in Splat R77.30

Myo_Min_Zaw — Mon, 22 Oct 2018 08:41:02 GMT

HI,

I am facing the issue is with creating for ICA issue as per below:

But, I saw the jumbo hotfix in Gaia OS only. My version is Splat R77.30. Where can I get R77.30 htofix version please?

Remark

This is fresh clean OS and not even restore for OCBC backup config file yet and I install for R77.30 Splat version is as per below:

Check_Point_R77.30_T207_Install.SPLAT_Smart-1.iso

Please kindly advice it.

Thanks.

Re: Not able to connect Smart Management server in Splat R77.30

Myo_Min_Zaw — Wed, 24 Oct 2018 13:34:28 GMT

HI All,

I am able to tricky for this issue is resolved by change date as old date to 2017-Oct-24 and generate for ICA via config and able to login to smart dashboard console after that. This is the bug in Splat R77.30 firmware also.

Thanks.

Re: Not able to connect Smart Management server in Splat R77.30

_Val_ — Wed, 24 Oct 2018 13:44:20 GMT

Could you please elaborate? Which particular bug are you referring to?

Re: Not able to connect Smart Management server in Splat R77.30

Myo_Min_Zaw — Wed, 24 Oct 2018 23:48:19 GMT

Yes. I am referring as per below kb.

Connectivity between SmartDashboard / SmartDomain Manager and Security Management / Multi-Domain Management Server R77.3…

Re: Not able to connect Smart Management server in Splat R77.30

_Val_ — Thu, 25 Oct 2018 04:36:26 GMT

Quoting from the SK you mentioned:

Effective February 26th 2018, the fix for this issue is included in R77.30 Gaia and Windows images.

Did you install an old image? If so, why?

Re: Not able to connect Smart Management server in Splat R77.30

Myo_Min_Zaw — Sun, 28 Oct 2018 05:08:19 GMT

Yes. I installed for R77.30 Splat version is due to simulate and preparation for Critical management server and Firewalls duplicate configuration from the customer environment. Because the customer not allow to run for migrate export tools in their environment in order to avoid to stop for cpstop and cpstart process at their environment. They just give it to me for system backup file via Gui only. So, I tried to simulate and restore at my lab environment and struggle to setup for a lot of issues..

Thanks.