topic Re: How to know when a cluster member was actived? in Firewall and Security Management

How to know when a cluster member was actived?

fernandobvds — Mon, 29 Jun 2020 14:09:28 GMT

Good Morning!

I have a cluster HA environment like this;

{

[Expert@ckp02:0]# cphaprob stat

Cluster Mode: VSX High Availability (Active Up) with IGMP Membership

Number Unique Address Assigned Load State

1 192.168.5.30 0% Standby
2 (local) 192.168.5.40 100% Active }

I need to know when a clusters member switched standby to active, i need this information with day and hour..

Do We have any commando to see this?

Thank you !

Re: How to know when a cluster member was actived?

PhoneBoy — Fri, 03 Jul 2020 23:07:57 GMT

I'd start here: https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk56202

Re: How to know when a cluster member was actived?

MartinTzvetanov — Mon, 06 Jul 2020 11:05:40 GMT

When you run cphaprob stat it says when was the last time a failover occur and the reason (I think this started in R80.10).

You can search the logs by clusterxl or member down or something similar and you'll see the exact timestampts.

Re: How to know when a cluster member was actived?

Timothy_Hall — Mon, 06 Jul 2020 12:53:04 GMT

In R80.20 and later, concise failover history can be shown with the cphaprob show_failover command. For earlier releases use a filter of "type:Control" for the traffic logs in the SmartConsole, or the clish command show routed cluster-state detailed for failover history.