https://community.checkpoint.com/t5/Firewall-and-Security-Management/ClusterXL-stuck-in-Standby-and-down/m-p/97506#M8814 <P>Check the setting for the CCP (Actual per interface: Multicast/Unicast/Broadcast) by checking cphaprob -a if&nbsp;</P> <P>had a similar issue last night while doing a move, after a reboot of the moved box it came right back.</P> Thu, 24 Sep 2020 23:08:45 GMT Maarten_Sjouw 2020-09-24T23:08:45Z https://community.checkpoint.com/t5/Firewall-and-Security-Management/ClusterXL-stuck-in-Standby-and-down/m-p/97460#M8813 <P>I applied a Jumbo hot fix to a cluster member and now it's stuck in Standby and Down. Please help.</P> Thu, 24 Sep 2020 14:30:07 GMT https://community.checkpoint.com/t5/Firewall-and-Security-Management/ClusterXL-stuck-in-Standby-and-down/m-p/97460#M8813 C_M 2020-09-24T14:30:07Z https://community.checkpoint.com/t5/Firewall-and-Security-Management/ClusterXL-stuck-in-Standby-and-down/m-p/97506#M8814 <P>Check the setting for the CCP (Actual per interface: Multicast/Unicast/Broadcast) by checking cphaprob -a if&nbsp;</P> <P>had a similar issue last night while doing a move, after a reboot of the moved box it came right back.</P> Thu, 24 Sep 2020 23:08:45 GMT https://community.checkpoint.com/t5/Firewall-and-Security-Management/ClusterXL-stuck-in-Standby-and-down/m-p/97506#M8814 Maarten_Sjouw 2020-09-24T23:08:45Z