topic How to tell SIC Reset NOT to fetch topology in Firewall and Security Management https://community.checkpoint.com/t5/Firewall-and-Security-Management/How-to-tell-SIC-Reset-NOT-to-fetch-topology/m-p/58440#M84875 <P>When upgrading our R77 gateways to R80.20 using blink, we have to Reset the SIC. When doing this on the R80.20 SmartCenter, the SmartCenter fetches the topology from the gateway and re-arranges the Antispoofing definitions, which is highly undesirable. Is there a way to prevent that the SmartCenter fetches the topology</P> Thu, 18 Jul 2019 06:26:43 GMT peter_schumache 2019-07-18T06:26:43Z How to tell SIC Reset NOT to fetch topology https://community.checkpoint.com/t5/Firewall-and-Security-Management/How-to-tell-SIC-Reset-NOT-to-fetch-topology/m-p/58440#M84875 <P>When upgrading our R77 gateways to R80.20 using blink, we have to Reset the SIC. When doing this on the R80.20 SmartCenter, the SmartCenter fetches the topology from the gateway and re-arranges the Antispoofing definitions, which is highly undesirable. Is there a way to prevent that the SmartCenter fetches the topology</P> Thu, 18 Jul 2019 06:26:43 GMT https://community.checkpoint.com/t5/Firewall-and-Security-Management/How-to-tell-SIC-Reset-NOT-to-fetch-topology/m-p/58440#M84875 peter_schumache 2019-07-18T06:26:43Z Re: How to tell SIC Reset NOT to fetch topology https://community.checkpoint.com/t5/Firewall-and-Security-Management/How-to-tell-SIC-Reset-NOT-to-fetch-topology/m-p/58551#M84876 Blink does a fresh install, which definitely requires resetting SIC.<BR />Not sure there's a way in SmartConsole to not also fetch topology... Fri, 19 Jul 2019 05:46:54 GMT https://community.checkpoint.com/t5/Firewall-and-Security-Management/How-to-tell-SIC-Reset-NOT-to-fetch-topology/m-p/58551#M84876 PhoneBoy 2019-07-19T05:46:54Z