topic Re: Unable to install QOS policy in Firewall and Security Management

Unable to install QOS policy

nagaraja_cs — Fri, 25 Oct 2019 06:37:57 GMT

Hi Team,

We have upgraded the appliance and changed the management interface.

R80.20 cluster with Jumbo hotfix TAKE_103.

Everything works fine except QOS.

When we install QOS policy ,we are getting error "A network interface name does not match the name assigned to the interface by the operating system"

There is no change in the interface name,we have verified it.

We have followed sk147593 but still it is same.

Disbled QOS blade and re-enabled the same but no luck.

We have a hospital environment so it is required to assign minimum bandwidth for one the critical machine.

Immediate help is appreciated.

Re: Unable to install QOS policy

Benedikt_Weissl — Fri, 25 Oct 2019 07:40:11 GMT

Hi,

have you checked for whitespaces after the interface name? Can you post the output of "fgate stat"?

Best Regards,

Re: Unable to install QOS policy

nagaraja_cs — Fri, 25 Oct 2019 07:48:54 GMT

After upgrading the appliance,we are unable to install policy at all(Not for a single time).Access control and Threat Prevention policies are installed.

There is no white space in the interface names.

Will the gateway shows the output for "fgate stat" if the QOS policy is not installed.

Re: Unable to install QOS policy

Benedikt_Weissl — Fri, 25 Oct 2019 08:00:02 GMT

Maybe its sk147593, can you try to delete the cache?

Re: Unable to install QOS policy

nagaraja_cs — Fri, 25 Oct 2019 08:05:59 GMT

Yes,it is performed but not working.

Re: Unable to install QOS policy

G_W_Albrecht — Fri, 25 Oct 2019 08:42:48 GMT

Please involve TAC - this is a serious issue...

Re: Unable to install QOS policy

Tuatara — Tue, 02 Mar 2021 17:48:17 GMT

Hello, have you solve the problem yet? I have the same issue on R80.40

Re: Unable to install QOS policy

Steven_Sultana — Fri, 28 May 2021 22:22:51 GMT

Sharing my experience. This happened to me after changing the topology and disabling an interface which was previously defined.

The disabled interface is not seen at all by the OS (eg. Missing from ifconfig), and this was causing the policy to fail (it seems the policy installation goes through the previously known interfaces as part of the procees). cpd debugs on the gateway were helpful to discover this.

Re: Unable to install QOS policy

the_rock — Sat, 29 May 2021 19:06:17 GMT

I agree with all responses...I know this is an older post, but sounds like a pretty serious issue. Have you been able to fix it?

Re: Unable to install QOS policy

Sony_James — Thu, 26 Aug 2021 15:40:52 GMT

Had same issue today on R80.10, tried everything listed here, nothing worked. Restarted both cluster members 1 by 1 and that resolved the issue.