https://community.checkpoint.com/t5/Firewall-and-Security-Management/Gateway-soft-shutdown-on-power-failure/m-p/100576#M7835 <P><SPAN>Can you please show me the command? The UPS, with remote control card, has a monitoring VM that can send soft shutdown commands</SPAN></P> Thu, 29 Oct 2020 16:28:04 GMT GianniPapetti 2020-10-29T16:28:04Z https://community.checkpoint.com/t5/Firewall-and-Security-Management/Gateway-soft-shutdown-on-power-failure/m-p/100554#M7833 <PRE><SPAN>Hello, I'd like to know if it was somehow possible to perform soft shutdown operations on a UPS signal following a power failure. The gateways are CP6200 plus and the UPS is an EATON 5SC. Best regards,<BR />G.</SPAN></PRE> Thu, 29 Oct 2020 13:24:34 GMT https://community.checkpoint.com/t5/Firewall-and-Security-Management/Gateway-soft-shutdown-on-power-failure/m-p/100554#M7833 GianniPapetti 2020-10-29T13:24:34Z https://community.checkpoint.com/t5/Firewall-and-Security-Management/Gateway-soft-shutdown-on-power-failure/m-p/100557#M7834 <P>Yes, it should be possible: Use either Win, Mac or Linux PC attached to <SPAN>EATON 5SC to send a shutdown command using SSL to the GWs. All depends on the Eaton SW, of course...</SPAN> </P> Thu, 29 Oct 2020 14:01:56 GMT https://community.checkpoint.com/t5/Firewall-and-Security-Management/Gateway-soft-shutdown-on-power-failure/m-p/100557#M7834 G_W_Albrecht 2020-10-29T14:01:56Z https://community.checkpoint.com/t5/Firewall-and-Security-Management/Gateway-soft-shutdown-on-power-failure/m-p/100576#M7835 <P><SPAN>Can you please show me the command? The UPS, with remote control card, has a monitoring VM that can send soft shutdown commands</SPAN></P> Thu, 29 Oct 2020 16:28:04 GMT https://community.checkpoint.com/t5/Firewall-and-Security-Management/Gateway-soft-shutdown-on-power-failure/m-p/100576#M7835 GianniPapetti 2020-10-29T16:28:04Z