topic quick way to add new fwcluster to the install on field in Firewall and Security Management https://community.checkpoint.com/t5/Firewall-and-Security-Management/quick-way-to-add-new-fwcluster-to-the-install-on-field/m-p/97529#M78339 <P>I had to build a second cluster of two gateways for a site with an existing 2-node cluster. I need to add this new cluster to the 'install on' section of the rules that the existing cluster is also present on. I have about 500 security policy rules and a similar amount of NAT rules. I believe there is somewhere between 200 and 300 rules in the security policy and the NAT policy where I have to do this so I am hoping I don't have to go one at a time. Any suggestions? CLI or Smatconsole?</P> Fri, 25 Sep 2020 10:25:24 GMT monks15 2020-09-25T10:25:24Z quick way to add new fwcluster to the install on field https://community.checkpoint.com/t5/Firewall-and-Security-Management/quick-way-to-add-new-fwcluster-to-the-install-on-field/m-p/97529#M78339 <P>I had to build a second cluster of two gateways for a site with an existing 2-node cluster. I need to add this new cluster to the 'install on' section of the rules that the existing cluster is also present on. I have about 500 security policy rules and a similar amount of NAT rules. I believe there is somewhere between 200 and 300 rules in the security policy and the NAT policy where I have to do this so I am hoping I don't have to go one at a time. Any suggestions? CLI or Smatconsole?</P> Fri, 25 Sep 2020 10:25:24 GMT https://community.checkpoint.com/t5/Firewall-and-Security-Management/quick-way-to-add-new-fwcluster-to-the-install-on-field/m-p/97529#M78339 monks15 2020-09-25T10:25:24Z Re: quick way to add new fwcluster to the install on field https://community.checkpoint.com/t5/Firewall-and-Security-Management/quick-way-to-add-new-fwcluster-to-the-install-on-field/m-p/97533#M78340 <P>Usually, you use the Install Targets group in install on that you can change centrally. Otherwise, you are correct - but who would add GWs to install on manually in 200 - 300 rules ?</P> Fri, 25 Sep 2020 11:18:20 GMT https://community.checkpoint.com/t5/Firewall-and-Security-Management/quick-way-to-add-new-fwcluster-to-the-install-on-field/m-p/97533#M78340 G_W_Albrecht 2020-09-25T11:18:20Z