topic HA Sync 2 Error on Gateway in Firewall & Security Management https://community.checkpoint.com/t5/Firewall-Security-Management/HA-Sync-2-Error-on-Gateway/m-p/11512#M751 <HTML><HEAD></HEAD><BODY><P>Hi guys,</P><P></P><P>We are getting a Sync 2 error on our monitoring systems for one of our gateways.&nbsp;</P><P></P><P>In theory, that is indicative of dropped updates due to sync overloads but that is not what I've found so far as shown below:</P><P></P><P>fw ctl pstat | grep overload<BR /> dropped updates as a result of sync overload: 0</P><P></P><P>cphaprob -ia list</P><P>There are no pnotes in problem state</P><P></P><P>cphaprob -l list</P><P>Device Name: Synchronization<BR />Registration number: 0<BR />Timeout: none<BR />Current state: OK<BR />Time since last report: 1.42226e+06 sec</P><P></P><P>I followed&nbsp;sk34476 but I haven't had any luck so far.&nbsp;</P><P></P><P>Has anybody come across this before?</P><P></P><P>Many thanks.</P></BODY></HTML> Sat, 21 Jul 2018 13:30:52 GMT Nick_Doropoulos 2018-07-21T13:30:52Z HA Sync 2 Error on Gateway https://community.checkpoint.com/t5/Firewall-Security-Management/HA-Sync-2-Error-on-Gateway/m-p/11512#M751 <HTML><HEAD></HEAD><BODY><P>Hi guys,</P><P></P><P>We are getting a Sync 2 error on our monitoring systems for one of our gateways.&nbsp;</P><P></P><P>In theory, that is indicative of dropped updates due to sync overloads but that is not what I've found so far as shown below:</P><P></P><P>fw ctl pstat | grep overload<BR /> dropped updates as a result of sync overload: 0</P><P></P><P>cphaprob -ia list</P><P>There are no pnotes in problem state</P><P></P><P>cphaprob -l list</P><P>Device Name: Synchronization<BR />Registration number: 0<BR />Timeout: none<BR />Current state: OK<BR />Time since last report: 1.42226e+06 sec</P><P></P><P>I followed&nbsp;sk34476 but I haven't had any luck so far.&nbsp;</P><P></P><P>Has anybody come across this before?</P><P></P><P>Many thanks.</P></BODY></HTML> Sat, 21 Jul 2018 13:30:52 GMT https://community.checkpoint.com/t5/Firewall-Security-Management/HA-Sync-2-Error-on-Gateway/m-p/11512#M751 Nick_Doropoulos 2018-07-21T13:30:52Z Re: HA Sync 2 Error on Gateway https://community.checkpoint.com/t5/Firewall-Security-Management/HA-Sync-2-Error-on-Gateway/m-p/11513#M752 <HTML><HEAD></HEAD><BODY><P>Is that one specific gateway the active node ?</P><P>What is latency between both nodes (ping) ?</P><P>What is interface used for sync (speed/duplex) ?</P><P>The error occurs only during specific action (policy push, adding new VLAN, ...) ?</P><P>What /var/log/messages says ?</P><P></P><P>Paste output from following commands:</P><P>ifconfig &lt;sync interface&gt;</P><P>ethtool -S&nbsp;<SPAN>&lt;sync interface&gt;</SPAN></P><P><SPAN>fw ctl pstat</SPAN></P><P><SPAN>cphaprob syncstat</SPAN></P></BODY></HTML> Sun, 22 Jul 2018 06:59:30 GMT https://community.checkpoint.com/t5/Firewall-Security-Management/HA-Sync-2-Error-on-Gateway/m-p/11513#M752 JozkoMrkvicka 2018-07-22T06:59:30Z