Unable to install R80.40 on 6200P appliance using ISO on USB

Jonne_Hannon — Fri, 17 Jul 2020 01:48:24 GMT

Hi all,

Just wondering if anyone else has had issues installing R80.40 on 6200P appliances. I used Check_Point_R80.40_T294.iso from sk160736 and the latest isomorphic tool to build the bootable USB, however the install failed to find storage drivers for the CD. I even tried mounting the ISO to virtual CD via the LOM and got the same error, so I doubt the USB drive I used was the problem. I did try another USB drive, but got the same error. The USB drive was used to install R80.20 across the fleet and also worked with R80.30. I resorted to installing R80.30 on the 6200P appliance from the USB drive, which worked without issue. Are there some drivers missing from the R80.40 ISO?

Thanks,

Jonne.

Re: Unable to install R80.40 on 6200P appliance using ISO on USB

shlomip — Fri, 17 Jul 2020 15:53:06 GMT

@Jonne_Hannon ,

Are you using latest ISOMorphic build from sk65205

and USB2.0 DOK?

topic Unable to install R80.40 on 6200P appliance using ISO on USB in Firewall and Security Management

Unable to install R80.40 on 6200P appliance using ISO on USB

Re: Unable to install R80.40 on 6200P appliance using ISO on USB