https://community.checkpoint.com/t5/Firewall-and-Security-Management/Startup-problem-with-3-10-kernel-on-OpenServer-with-many/m-p/84591#M6515 It seems to occur on R80.20 and R80.30<BR />I have seen it fail on R80.30 With Jumbo Hotfix Take 195 Fri, 08 May 2020 14:52:35 GMT Hugo_vd_Kooij 2020-05-08T14:52:35Z https://community.checkpoint.com/t5/Firewall-and-Security-Management/Startup-problem-with-3-10-kernel-on-OpenServer-with-many/m-p/84590#M6514 <P>Hi,</P> <P>This week I had a weird problem. With all interfaces connected the firewall will not start.</P> <P>When we disconnected 1 bond interface with a number of VLANs the unit started fine.</P> <P>Then it turned out that we have another customer with the same issue. It seems to be if you have over 172 interfaces on the firewall.</P> <P>I have no suitable hardware to test this. I have not yet found found time to test this on a VM with the 3.10 kernel.</P> <P>&nbsp;1. Has anyone else seen this issue? (Anyone with open tickets?)</P> <P>&nbsp;2. Did someone find a soulution/workaround?</P> <P>Regards, Hugo.</P> <P>&nbsp;</P> Fri, 08 May 2020 14:50:43 GMT https://community.checkpoint.com/t5/Firewall-and-Security-Management/Startup-problem-with-3-10-kernel-on-OpenServer-with-many/m-p/84590#M6514 Hugo_vd_Kooij 2020-05-08T14:50:43Z https://community.checkpoint.com/t5/Firewall-and-Security-Management/Startup-problem-with-3-10-kernel-on-OpenServer-with-many/m-p/84591#M6515 It seems to occur on R80.20 and R80.30<BR />I have seen it fail on R80.30 With Jumbo Hotfix Take 195 Fri, 08 May 2020 14:52:35 GMT https://community.checkpoint.com/t5/Firewall-and-Security-Management/Startup-problem-with-3-10-kernel-on-OpenServer-with-many/m-p/84591#M6515 Hugo_vd_Kooij 2020-05-08T14:52:35Z