topic Re: Static Route is not applied in Firewall and Security Management

Static Route is not applied

mallayiotis — Fri, 10 Apr 2020 09:05:24 GMT

Hi all,

We are experiencing an issue with a static routing in our GW R77.30.

We have already a routing for the subnet 192.168.X.X/16 to go through destination A and we have added a new routing for the subnet 192.168.Y.X/24 to go through destination B but the new routing is never applied. All traffic is going through destination A.

We believe that the issue is related with the routed service.

Can anyone assist?

Kind Regards,

Re: Static Route is not applied

PhoneBoy — Sat, 11 Apr 2020 04:28:12 GMT

This should probably be a TAC case.
However, R77.30 is End of Support, so if it is a bug and it's not fixed in the last jumbo hotfix, your only recourse will be to upgrade to a supported version.

Re: Static Route is not applied

Timothy_Hall — Sat, 11 Apr 2020 17:04:26 GMT

Is the next hop for 192.168.Y.X/24 a valid responding IP address located on a directly-reachable subnet/interface? If not you can configure the route but it will never be added to the live routing table unless the next hop can be directly and successfully reached; you cannot add a route with a next hop address that is reached through some other router and have it work, the next hop must be local.