topic Re: MEP VPN Migration in Firewall and Security Management

MEP VPN Migration

CyberBreaker — Tue, 24 Mar 2020 07:21:10 GMT

Hi Guys,

I need to migrate an old 4400 appliance (running as VPN RAVPN gateway) to a new 5600 appliance and this VPN solution is using MEP (Multi-Entry Point Solution). Besides from replicating the configuration of the 4400 to 5600, do I need to export some files or profiles from the 4400 and the 5600?

Thank you very much for the help.

Re: MEP VPN Migration

PhoneBoy — Tue, 24 Mar 2020 22:20:42 GMT

Is the 5600 going to adopt all the same settings (including IP addresses) of the 4400?

Re: MEP VPN Migration

CyberBreaker — Wed, 25 Mar 2020 06:24:07 GMT

Hi @PhoneBoy , Yes, that is the plan, but I am not sure if there are any files inside the 4400 that I need to export and import to the new 5600 as far as the MEP solution is concerned? Thanks

Re: MEP VPN Migration

PhoneBoy — Wed, 25 Mar 2020 16:40:09 GMT

If you modified any files directly, those may need to be copied or the configuration changes applied.
This could include but is not limited to:
$FWDIR/conf/trac_client_1.ttm
$FWDIR/conf/trac.config

Re: MEP VPN Migration

CyberBreaker — Mon, 30 Mar 2020 20:47:25 GMT

Thanks for the reply @PhoneBoy,

Is there any profile/s that are installed in the endpoint machines for the MEP solution? Where can I find that?

Thank you so much.

Re: MEP VPN Migration

PhoneBoy — Mon, 30 Mar 2020 22:46:26 GMT

They would be part of the site configuration which is stored on the client, most likely obscured.
I believe it is the same filenames on the Endpoint, but obviously a different directory that I don't recall offhand.