topic Re: Bond interfaces in Firewall and Security Management

Bond interfaces

C_M — Wed, 18 Mar 2020 15:06:08 GMT

How do I identify which interfaces are in a bond in VSX and on standalone gateways?

Re: Bond interfaces

_Val_ — Wed, 18 Mar 2020 15:10:34 GMT

show bonding

https://sc1.checkpoint.com/documents/R80.30/WebAdminGuides/EN/CP_R80.30_Gaia_AdminGuide/html_frameset.htm?topic=documents/R80.30/WebAdminGuides/EN/CP_R80.30_Gaia_AdminGuide/214792

Re: Bond interfaces

C_M — Wed, 18 Mar 2020 15:42:24 GMT

That just says "

Bonding Interfaces

Number of bonding groups: 2"

Looks like cphaconf show_bond is closer to what I'm looking for. Thanks though!

Re: Bond interfaces

Maarten_Sjouw — Wed, 18 Mar 2020 19:16:56 GMT

show configuration bonding
add bonding group 3
add bonding group 10
#add bonding group 3 interface eth0
#add bonding group 3 interface eth1
#add bonding group 10 interface eth12
#add bonding group 10 interface eth13
set bonding group 3 mode 8023AD
set bonding group 3 lacp-rate slow
set bonding group 3 xmit-hash-policy layer2
set bonding group 10 mode active-backup
#set bonding group 10 primary eth12

Re: Bond interfaces

HeikoAnkenbrand — Thu, 19 Mar 2020 06:21:56 GMT

Hi @C_M,

Details about the bond interface are located in this file on Gaia OS:

/proc/net/bonding/<Name_of_Bond_Interface>

Example: Interface bond1 is configured in Active/Backup mode:

[Expert@HostName]# cat /proc/net/bonding/bond1
Ethernet Channel Bonding Driver: v3.4.9 (January 11, 2018)

Bonding Mode: fault-tolerance (active-backup)
Primary Slave: None
Currently Active Slave: eth1
MII Status: up
MII Polling Interval (ms): 100
Up Delay (ms): 200
Down Delay (ms): 200

Slave Interface: eth1
MII Status: up
Link Failure Count: 0
Permanent HW addr: 00:50:56:aa:12:0f

Slave Interface: eth2
MII Status: up
Link Failure Count: 0
Permanent HW addr: 00:50:56:aa:41:e1
[Expert@HostName]#

Re: Bond interfaces

_Val_ — Thu, 19 Mar 2020 08:52:26 GMT

From the link I have given you:

Shell	Command
Gaia Clish	`show cluster bond {all \| name <`bond_name`>}` `show bonding groups`
Expert mode	`cphaprob show_bond [<`bond_name`>]` `cphaprob show_bond_groups`

Shell

Command

Gaia Clish

show cluster bond {all | name <bond_name>}
show bonding groups

Expert mode

cphaprob show_bond [<bond_name>]

cphaprob show_bond_groups