topic Open Server Cisco UCS 220 M3 GAIA in Firewall and Security Management

Open Server Cisco UCS 220 M3 GAIA

Vajram — Thu, 30 Jan 2020 19:09:02 GMT

Hi,

Anyone running Open Server Gaia on Cisco UCS C220 M3?

We are trying to install Gaia open server on Cisco UCS C220 M3, getting i8042 controller not found.

After move forward to continue the installation getting as attached error.

As per below link we tried on raid 1 , but getting same error.

https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk112204

Could you please help on this issue.

Early reply will be highly appreciated..!!!!!

Regards

Vajram Gajengi

Re: Open Server Cisco UCS 220 M3 GAIA

Chris_Atkinson — Fri, 31 Jan 2020 00:12:04 GMT

I had a quick look on the HCL and couldn't find the M3 listed.

https://www.checkpoint.com/support-services/hcl/

Re: Open Server Cisco UCS 220 M3 GAIA

John_Fleming — Fri, 31 Jan 2020 10:12:46 GMT

What version? My guess is the raid is larger then 2TB? As test recreate raid at 1.9TB and see if it installs. If it does can you use a more recent version? I believe this is addressed with the 3.10 kernel. R80.40 has it other versions you may need a different download. Not sure if this is a gateway or management server.

Re: Open Server Cisco UCS 220 M3 GAIA

PhoneBoy — Sat, 01 Feb 2020 00:23:35 GMT

If the hardware isn't on our HCL, there is zero guarantee it will work.
It will never be supported if it's not on the HCL.
If you require support for this hardware, please contact your local Check Point office.

Re: Open Server Cisco UCS 220 M3 GAIA

Nandhakumar — Tue, 17 May 2022 17:14:49 GMT

I have similar issue but Hardware i am using is UCSC-C240-M5SD. Can you please assist on this. We have similar device working fine in other regions.

Re: Open Server Cisco UCS 220 M3 GAIA

G_W_Albrecht — Wed, 18 May 2022 07:08:40 GMT

Before ordering HW, please look into https://www.checkpoint.com/support-services/hcl/ if it is supported!