https://community.checkpoint.com/t5/Firewall-and-Security-Management/Modifying-bond/m-p/67443#M5150 <P>Hello,</P><P>R77.30 cluster (active/standby) running on Open Servers with a bunch of bonds.</P><P>I need to modify one of the bonds on the standby unit (and replace one of the interfaces in the bond).&nbsp; Do I need to get the topology at the end and push the policy? I don't see any references of individual interfaces in SmartDashboard.</P><P>Thank you.</P> Thu, 14 Nov 2019 15:59:26 GMT Teddy_Brewski 2019-11-14T15:59:26Z https://community.checkpoint.com/t5/Firewall-and-Security-Management/Modifying-bond/m-p/67443#M5150 <P>Hello,</P><P>R77.30 cluster (active/standby) running on Open Servers with a bunch of bonds.</P><P>I need to modify one of the bonds on the standby unit (and replace one of the interfaces in the bond).&nbsp; Do I need to get the topology at the end and push the policy? I don't see any references of individual interfaces in SmartDashboard.</P><P>Thank you.</P> Thu, 14 Nov 2019 15:59:26 GMT https://community.checkpoint.com/t5/Firewall-and-Security-Management/Modifying-bond/m-p/67443#M5150 Teddy_Brewski 2019-11-14T15:59:26Z https://community.checkpoint.com/t5/Firewall-and-Security-Management/Modifying-bond/m-p/67444#M5151 <P>If simply modifying the bond then the Topology within SmartConsole not changing.</P><P>Would suggest that do a policy install afterwards but no need to update topology</P> Thu, 14 Nov 2019 16:00:45 GMT https://community.checkpoint.com/t5/Firewall-and-Security-Management/Modifying-bond/m-p/67444#M5151 mdjmcnally 2019-11-14T16:00:45Z