topic Re: Pushing configuration to VSX fails by Blade activation in Firewall and Security Management

Pushing configuration to VSX fails by Blade activation

ShadowNif — Wed, 01 Oct 2025 11:13:17 GMT

Hello,

I am trying to activate one of my Threat Prevention Blades "Anti-Virus" and I am getting this error on my VSX Env FPVSX12 on (Cluster) FPVSX01.

Well i found out that this issue by all my VSX, the one thing that we did was upgrading the management to R82 and VSX is on R81.20.
Any idea what could this be?

PS: All Interfaces under Typology are assigned and there are no problems there!

Checking connection with VSX Generating VSX Configuration for FPVSX12 on FPVSX01. Pushing VSX Configuration to FPVSX01. FPVSX01: processed 33% of configuration... Failed to configure FPVSX01 with the following errors: FPVSX01...: VSX configuration was applied successfully. Virtual System Processing Completed with Errors Pushing network configuration to Virtual System operation has finished with errors. Refer to the messages retrieved during the VSX push configuration stage and make sure that the configuration you are trying to push is legal. If the problem persists contact Check Point Technical Support. Operation has failed.

Re: Pushing configuration to VSX fails by Blade activation

the_rock — Wed, 01 Oct 2025 10:51:53 GMT

I recall seeing this while back and turned out to be license problem.

Andy

Re: Pushing configuration to VSX fails by Blade activation

the_rock — Wed, 01 Oct 2025 10:55:27 GMT

@ShadowNif

If the license is okay, see if below sk helps.

Best,

Andy

https://support.checkpoint.com/results/sk/sk108138

Re: Pushing configuration to VSX fails by Blade activation

ShadowNif — Wed, 01 Oct 2025 11:00:45 GMT

Thnx, but i already checked both. I have the license and all interfaces are assigned and have names,ips !

Re: Pushing configuration to VSX fails by Blade activation

the_rock — Wed, 01 Oct 2025 11:01:26 GMT

So you are saying sk is not applicable in your situation?

Andy

Re: Pushing configuration to VSX fails by Blade activation

ShadowNif — Wed, 01 Oct 2025 11:06:24 GMT

Exactly, cuz i have the IPS active and there is no issue

Re: Pushing configuration to VSX fails by Blade activation

the_rock — Wed, 01 Oct 2025 11:10:38 GMT

Let me see if I can reproduce this in the lab and will update you. Did you check with TAC yet?

Best,

Andy

Re: Pushing configuration to VSX fails by Blade activation

ShadowNif — Wed, 01 Oct 2025 11:12:26 GMT

Well i found out that this issue by all my VSX, the one thing that we did was upgrading the management to R82 last week. This is the only relative thing that happened lately

Re: Pushing configuration to VSX fails by Blade activation

the_rock — Wed, 01 Oct 2025 11:14:15 GMT

To me, does not sound like that would have caused the issue, but I could be mistaken. If you are saying all works with IPS blade, then certainly would make sense its strictly anti virus related. If you uncheck av blade, then all is good?

Andy

Re: Pushing configuration to VSX fails by Blade activation

the_rock — Wed, 01 Oct 2025 11:15:01 GMT

Does issue go away if you uncheck the blade?

Re: Pushing configuration to VSX fails by Blade activation

the_rock — Wed, 01 Oct 2025 14:26:01 GMT

Hey,

Just tried this in brand new R82 lab, no errors for me. So, that logically tells me there must be something in your environment causing this...cant say 100% if its strictly AV blade related, but might be worth checking with TAC to confirm.

Andy

Re: Pushing configuration to VSX fails by Blade activation

Magnus-Holmberg — Wed, 01 Oct 2025 14:38:52 GMT

So we had this issue on all our MDS upgrades to R82 HFA39
More or less its enough to.

- Push policy to the VSX cluster (VS0)
- Open up a VS and just press OK on it for it to do the communication to without any changes what so ever.
- Install policy on the VS.

And after that its back to normal, and i experience the same on 7 MDS with 15+ VSX clusters 😉

Regards,
magnus

Re: Pushing configuration to VSX fails by Blade activation

CrociStrike030 — Mon, 06 Oct 2025 08:24:24 GMT

Hi Magnus,

Thank you! This fixed my issue.

Tim

Re: Pushing configuration to VSX fails by Blade activation

Magnus-Holmberg — Mon, 06 Oct 2025 14:22:37 GMT

np 🙂