Open Server Cisco UCS M4 and M5

Kaland — Wed, 24 Oct 2018 12:30:16 GMT

Hi,

Anyone running Open Server Security Gateway R80 on Cisco UCS M4 or M5?

I want to order new hardware for our R80 migration, and can only find UCS M4 seriers on the hardware compatibility list. The problem is that the raid controller on the list is outdated, and no longer a options on Cisco UCS.

Symbios also changed name to LSI a couple years ago.

Any input much appreciated!

Official web site	UCS C240 M4 Official site
Memory	Qualified using 2X8GB DDR4
Network Controller	Intel I350 Gigabit Network
Additional Network Controller	Symbios Logic MegaRAID SAS-3 3108
Mass Storage Device

Re: Open Server Cisco UCS M4 and M5

PhoneBoy — Fri, 26 Oct 2018 23:09:23 GMT

The general rule is: if it's not in the HCL, it's not supported.

In terms of newer hardware for Security Gateway, once R80.20 with the new kernel is available, it will be possible to support additional hardware.

Of course, if you install VMware ESX on the UCS, you can run virtualized instances just fine.

topic Re: Open Server Cisco UCS M4 and M5 in Firewall and Security Management

Open Server Cisco UCS M4 and M5

Re: Open Server Cisco UCS M4 and M5