Regarding SCV For Remote VPN

Prasaddere — Wed, 18 Dec 2024 10:43:46 GMT

We have 2 VS (VS01 and VS02) On VS01 VPN users, we have configured SCV and applied desktop policy. It was working fine for host checker. In Global properties, we have Setting enabled "Apply Secure Configuration Verification on Simplified mode Firewall Policies" in Remote Access ->Secure configuration Verification (SCV) )

But on VS02, same configuration with only different IP on Inbound and out interface, rest everything is same.

Our issue was that when user connecting to VS02 VPN Link, traffic was not routing towards VPN tunnel.

After multiple check, we tried to uncheck "Apply Secure Configuration Verification on Simplified mode Firewall Policies" in Remote Access ->Secure configuration Verification (SCV)).

After that VS02 VPN started working.

we tested VS01 user host checker, it was also working. So need to know importance of that setting disabled in global properties in Remote access ->Secure configuration Verification(SCV) -> Apply Secure Configuration Verification on Simplified mode Firewall Policies"

Re: Regarding SCV For Remote VPN

PhoneBoy — Wed, 18 Dec 2024 17:59:38 GMT

Unchecking the box turns off SCV checking for all gateways/VS managed by the domain.
Did you configure the local.scv in the relevant VS context (e.g. by using vsenv X before editing $FWDIR/conf/local.scv)?

topic Re: Regarding SCV For Remote VPN in Firewall and Security Management

Regarding SCV For Remote VPN

Re: Regarding SCV For Remote VPN