topic Re: blink - 6000 series support and JHFA installation in Firewall and Security Management

blink - 6000 series support and JHFA installation

phlrnnr — Wed, 07 Aug 2019 17:23:50 GMT

A couple questions around blink imaging:

1. sk120193 doesn't show support for 6000 series appliances. Is it truly not supported, or is the sk article just not updated?

2. Regarding the images that can be installed via blink: Is there any way to install a 'base' image [eg. R80.20 (GA Take 101)] and then add offline CPUSE packages to be installed? Or can blink only install the base images that exist in sk120193, and everything else would have to be done after the fact via CPUSE? For example, how would I use blink to install R80.20 + JHFA Take 78?

Re: blink - 6000 series support and JHFA installation

_Val_ — Thu, 08 Aug 2019 08:18:32 GMT

As far as I know, we do not have blink image for 6000 series yet. If I am not mistaken, it runs 3.10 kernel, and blink for it is still in works.

Re: blink - 6000 series support and JHFA installation

Norbert_Bohusch — Thu, 08 Aug 2019 08:04:27 GMT

6000 series is still 2.6 kernel.
Only 16k, 26k, cloud and specific open servers are using 3.10 on gateway.

Re: blink - 6000 series support and JHFA installation

_Val_ — Thu, 08 Aug 2019 08:18:04 GMT

@Norbert_Bohusch could be, let me check with developers then

Re: blink - 6000 series support and JHFA installation

_Val_ — Thu, 08 Aug 2019 08:21:58 GMT

@Norbert_Bohusch correct, my mistake, mixed with 16k. Chasing R&D to see why 6000 do not have blink. Will update when answered

Re: blink - 6000 series support and JHFA installation

Norbert_Bohusch — Thu, 08 Aug 2019 08:23:47 GMT

I assume that there is no blink as 6000 series uses still different images then other appliances (3000, 5000,15000, etc.).

Re: blink - 6000 series support and JHFA installation

_Val_ — Thu, 08 Aug 2019 08:30:21 GMT

@Norbert_Bohusch you are most probably right. Now, the question is, why 🙂

Re: blink - 6000 series support and JHFA installation

Richard_Amos — Sat, 21 Mar 2020 15:09:34 GMT

Hi,

Did you ever hear back why? Will there ever be a blink image for the 6000s in R80.20 (I see that there is one for R80.40)?

The OP had also asked about including JHFA's as part of a Blink installation. I've done plenty of Blink installs with customized commands, but it is not clear to me how to include a JHFA. Is this possible?

Thanks!

Re: blink - 6000 series support and JHFA installation

Oliver_Fink — Fri, 12 Jun 2020 15:56:53 GMT

I have the same question: Why is Blink not supported on the "new" appliances. In sk120193 (Blink) I do not see any Image especially for GAiA 3.10, but in sk153152 (R80.30 JHFA) I find an image "Blink Image for Security Gateway Gaia 3.10 - Clean Install / Upgrade" with that GAiA Release.

Could someone from Check Point please shed some light on that? Is Blink supported with GAiA 3.10? When will it be supported for the new appliances?

Re: blink - 6000 series support and JHFA installation

_Val_ — Fri, 12 Jun 2020 17:17:54 GMT

Blink image for 3.10 you are referring to in sk153152, it is only supported to the following: 26000T, 26000, 23900, 23800, 16000T, 16000.

As you can see, 6K are not listed. AFAIK, 6000 have a RAID which is not playing nicely with Blink.