topic R77.30 - rpm command is not working. in Firewall and Security Management

R77.30 - rpm command is not working.

HitManExp — Mon, 24 Jun 2019 09:10:22 GMT

Hello guys, i need help with "rpm" command. If i started command 'rpm -qa ntp' causes session to hang indefinitely. How can i check, what wrong with this command?

Re: R77.30 - rpm command is not working.

PhoneBoy — Thu, 27 Jun 2019 02:24:52 GMT

The TAC is likely required to troubleshoot the problem.
If you just want to know the package version, it's the following on my R77.30: ntp-4.2.2p1-15.1.cp990180003

Re: R77.30 - rpm command is not working.

HitManExp — Thu, 27 Jun 2019 11:41:17 GMT

I would like to know in general how can i solve this issue without firewall reboot. This command is generaly not working, for example if i started "rpm -qa | sort" session to hang indefinitely too... All daemon on firewall is stable and online...

Re: R77.30 - rpm command is not working.

PhoneBoy — Thu, 27 Jun 2019 21:33:33 GMT

In normal operation, you should not need to interact with the rpm command at all.
Almost all patches are installed via CPUSE these days.
That raises the question: why is this relevant?

If it's truly an issue, please open a TAC case so we can investigate.

Re: R77.30 - rpm command is not working.

HitManExp — Fri, 28 Jun 2019 12:05:54 GMT

Thanks for information, i'll be think about TAC case. And yes, it is issue for me 🙂

BR