topic Re: 6200P not taking LOM firmware upgrade in Firewall and Security Management

6200P not taking LOM firmware upgrade

JTackling — Wed, 05 Jun 2024 17:34:10 GMT

I am trying to upgrade firmware on a 6200P LOM card to v6.2 . Unlike when you put in the wrong firmware it doesn't stop me from going further, I upload the correct firmware and it stays on processing load icon forever until it times out and kicks me back out to the login page. Any suggestions on how to fix?

Re: 6200P not taking LOM firmware upgrade

yacovs — Thu, 06 Jun 2024 06:09:08 GMT

Hi Beholder

Is there any VPN connection on your PC?
This might block the uploading of the FW

Re: 6200P not taking LOM firmware upgrade

Chris_Atkinson — Thu, 06 Jun 2024 11:48:47 GMT

What is the current LOM firmware version you have and which browser is used for the upload?

Re: 6200P not taking LOM firmware upgrade

the_rock — Thu, 06 Jun 2024 12:37:50 GMT

Just to make sure, this is the sk we are talking about?

Andy

https://support.checkpoint.com/results/sk/sk88064

Re: 6200P not taking LOM firmware upgrade

JTackling — Thu, 06 Jun 2024 12:45:04 GMT

The current LOM version is 6.1 . I have tried chrome and Firefox. All I can think of is that it's a bad LOM card? I've done this same update on 50 of our other Checkpoint devices.

Re: 6200P not taking LOM firmware upgrade

JTackling — Thu, 06 Jun 2024 12:45:58 GMT

Yes it is.

Re: 6200P not taking LOM firmware upgrade

the_rock — Thu, 06 Jun 2024 14:13:28 GMT

If you did this so many times before and was fine on different firewalls, does not sound like you are doing anything wrong. Personally, I would call TAC and see if they can check it for you. Hope its not an issue with LOM card itself...

See if below helps.

Andy

https://community.checkpoint.com/t5/General-Topics/LOM-refusing-conections-after-firmware-update-to-6-15/td-p/161607