topic Re: Connmonitor Problem in Firewall and Security Management

Connmonitor Problem

Hari122939_ — Mon, 29 Jan 2024 11:45:36 GMT

Hello Team,

I have integrated successfully the 2 Quantum Spark 1600 Security Gateways(R80.20.50) with Security Management Server(R80.40) and cluster formation also complete successfully .I gave "cphaprob -l list" command in one of cluster member. The device shows "Connmonitor" error and its state is "Problem".

Please anyone give a solution for this problem.

Re: Connmonitor Problem

the_rock — Mon, 29 Jan 2024 18:41:33 GMT

Not certain if same clustering commands work as they do on regular Gaia OS, but give it a go from expert mode on both members and please share the output.

Best,

Andy

cphaprob roles

cphaprob state

cphaprob -a if

cphaprob -i list

cphaprob -l list

cphaprob syncstat

cphaprob mvc

Re: Connmonitor Problem

Hari122939_ — Thu, 01 Feb 2024 14:55:27 GMT

I have connected with checkpoint technical support team and they shared the below document. So, our issue also resolved.

https://support.checkpoint.com/results/sk/sk176108

Thank You For replying

Re: Connmonitor Problem

the_rock — Thu, 01 Feb 2024 15:05:39 GMT

Thanks for following up, great job!

Andy

Re: Connmonitor Problem

ma_gorkhali — Wed, 18 Sep 2024 07:02:35 GMT

Just an FYI , Faced up similar issue in 1550 appliance. Disabling and enabling back the probe settings solved the issue. You do not need to disable it permanently incase if you need the probe to work.