topic Re: License using ip address of bond interface in Firewall and Security Management

License using ip address of bond interface

Massimiliano — Wed, 12 Jul 2023 13:58:08 GMT

Hi,

I need change the license of my Secure Gateway; is it possible use as local ip address an ip of bond.x (where x is the number of vlan)interface?

Let me know.

Best Regards

Massimiliano

Re: License using ip address of bond interface

Chris_Atkinson — Thu, 13 Jul 2023 02:06:37 GMT

Are you using local licensing or central, eval?

Typically it's the Security Management's IP.

Re: License using ip address of bond interface

Jett5529 — Thu, 13 Jul 2023 08:33:48 GMT

@Massimiliano MyEnvoyAir wrote:
Hi,
I need change the license of my Secure Gateway; is it possible use as local ip address an ip of bond.x (where x is the number of vlan)interface?
Let me know.
Best Regards
Massimiliano

According to the documentation from Broadcom, you can change the license of your Secure Gateway by connecting to the ISG via SSH, accessing the CLI and entering enable mode, and then using the command licensing load id license_id username username password password. You will need to have your license ID available before installing your license.

Re: License using ip address of bond interface

Chris_Atkinson — Fri, 14 Jul 2023 02:10:58 GMT

Please clarify the check point appliance model, software version in question and management / license mode?

Re: License using ip address of bond interface

Massimiliano — Fri, 14 Jul 2023 08:37:28 GMT

The Gateway is a CPAP-SG5200-NGTP, in R81 with local license mode

Re: License using ip address of bond interface

Chris_Atkinson — Fri, 14 Jul 2023 09:59:30 GMT

Yes, however per sk62685:

You must generate licenses for the main IP address of the corresponding object in SmartConsole.

Re: License using ip address of bond interface

Massimiliano — Fri, 14 Jul 2023 09:52:56 GMT

Thanks