topic Re: Port Forwarding in Firewall and Security Management

Port Forwarding

TechGromit — Tue, 07 Feb 2023 18:35:01 GMT

So I got a firewall request, They want to forward anything received on port tcp/1880 to 8007 for a range of 18 IP addresses, but I don't see a way to accomplish this from the add new service or adding an ip address with a NAT. Below someone posted a "solution" for a similar issue, but I "configured it manually" isn't particularly helpful to me. How was it configured manually?

Linus

Contributor

‎2022-05-09 03:45 AM

I got the solution: I configured it manually and used the 1.1.1.1 as "Original Destination". Also there was a rule missing in the Access Policy that allows the traffic.

Re: Port Forwarding

Lloyd_Braun — Tue, 07 Feb 2023 19:50:57 GMT

Use the "original services" and "translated services" columns in the manual network address translation policy.

Re: Port Forwarding

the_rock — Tue, 07 Feb 2023 20:01:52 GMT

As @Lloyd_Braun mentioned, you need to apply same logic. Sadly, you cant apply inbound static NAT on the object in order to translate the service.