topic Re: Partial config sync between Quantum spark 1800 HA in Firewall and Security Management

Partial config sync between Quantum spark 1800 HA

CheckCheckM — Mon, 23 Jan 2023 16:34:40 GMT

Hello all,

I'm facing some HA configuration issue between quantum spark 1800. I have done HA configuration using one sync link and one HA link (LAN1). When i swing primary to secondary, ipsec tunnel and ssl vpn configuration are missing at secondary device. is there any ha config is missing at mine? i used virtual ip address to login as management.

is anyone experienced that kind of issue?

Thank you.

Re: Partial config sync between Quantum spark 1800 HA

G_W_Albrecht — Mon, 23 Jan 2023 17:07:16 GMT

Locally Managed ? You did deploy it following the cluster configuration steps ? Only the active node is configured, secondary is synced after FTW. This is different to GAiA...

Re: Partial config sync between Quantum spark 1800 HA

CheckCheckM — Mon, 23 Jan 2023 17:11:34 GMT

Correct, it is locally managed. I deploy both firewall as primary first and secondary next step by step properly. When ha setup is done, i did ipsec tunnel and ssl config. Then, i swing primary to secondary.

note: the same firmware version. Thanks.