topic Re: multiple security feature enable on gateway in Firewall and Security Management

multiple security feature enable on gateway

leangm — Fri, 06 Jan 2023 05:04:45 GMT

Hi community

Could anyone tell me about the gateway firewall

if the gateway firewall enables many blades on

Ex: Firewall blade, IPS, identity awareness, and app control

but app control is not attached to the security policy.

my answer is when the firewall scans for the matching rule will it scan check including app control blade or not?

THANK

Re: multiple security feature enable on gateway

Chris_Atkinson — Fri, 06 Jan 2023 10:59:30 GMT

To clarify you have an R8x gateway without AppC activated in the policy/layers only in the gateway object itself?

Re: multiple security feature enable on gateway

the_rock — Fri, 06 Jan 2023 12:27:01 GMT

Put it this way...IF you say have appc blade disabled on the gateway, but enabled in policy layer, and appc rules are there, rules wont take effect.

Re: multiple security feature enable on gateway

PhoneBoy — Fri, 06 Jan 2023 14:38:48 GMT

If the security policy active on the gateway doesn’t include any App Control elements, then it shouldn’t have any effect.
Having said that, many of the blades use the same infrastructure underneath (IPS and App Control, for instance).

Re: multiple security feature enable on gateway

leangm — Sat, 07 Jan 2023 05:33:13 GMT

I mean gateway have enabled app control blade

but the policy doesn't define with any application

Re: multiple security feature enable on gateway

leangm — Sat, 07 Jan 2023 05:33:37 GMT

I mean gateway have enabled app control blade

but the policy doesn't define with any application